Any reviews on Eagle EA-750 servo?

[JJN]

 

@nylonRigging, I googled around and found the one page manual for the Consew. They have a setting for start with needle up or down and the needle position speed. I cannot fine any reference to enable/disable the NPS. I found that there are nine settings, U0 thru U8. I suppose you can experiment with the 'unknown' settings. You would think there would be better documentation with a name like Consew.

[dikman]

nylonRigging, which model Consew do you have? I can only find 2-button models on their website, the OP picture is a 4-button?

[nylonRigging]

On 12/7/2019 at 9:55 PM, dikman said:

nylonRigging, which model Consew do you have? I can only find 2-button models on their website, the OP picture is a 4-button?

 

It a ( CSM3000 ) , and it has a 4-button control panel .  The package the OP posted looks exact to the Consew I have .

.

Edited December 9, 2019 by nylonRigging

[dikman]

This is quite bizarre. Consew don't list a CSM3000 on their website when I searched for manuals. I found references, via google, to the 3000 being an upgrade to the 1000 but only showing it as a 2-button unit. I found one post from someone who bought one but didn't get a manual with it and had to contact Consew for it.

All very strange. Did you get a manual with yours?

[nylonRigging]

You can find reference of Consew listing it online. CSM3000 is a Brushless, 750 watt 1hp . . the CSM 3000 is (without PS) , and the CSM30001 is ( with NPS) .

The Consew , ( Brushless Motor User Manual ) , that came with it in the box is just simple single piece of paper with the usual  .. speed setting / rotation change / needle position setting / return to factory setting .
The control , is a 4 -Button control panel that makes It very easy to program the necessities . The 'return factory setting' is only for NPS, .. but i did still try that on 1st day I got it .

It's rebranded . But the OP posted exact machine as the one I bought, and mine new out of box hammers-out 5 stitches on the power-up .  So. I will Never buy another like this model and I will not recommend to others looking to buy . Like I was saying before I called Consew day after getting it, I explained the problem, told them what the new motor was doing, but all they suggested was I make a video and send to them .
And that is ( All They wanted to hear from me ) . The factory help guy was offering nothing else but me making and download a video to him .  So I just said ..." I will get right on that ". then just went back to work .

After that experience with Consew  CS ( my Opinion ) , If you have a problem with a New bought motor . Consew Customer Support phone # , pretty much worthless, they are Lazy with little to no skill, visualization of problem solving on the products they sell . .. But in all fairness, there customer service does like to watch video at work. Consew is dead to me .
.

Edited December 10, 2019 by nylonRigging