wolfsdenleather Report post Posted March 24, 2019 Hi, I have a disability with my left hand. I have for the last 2 years or so tried to just keep working and hope that I would beat it. It has actually gotten worse and is now, trying to hold tools in that hand has just gotten to hard. I know that those things aren't being made anymore. I am putting some feelers out there to see if there are any used ones available. Thanks for the help. Randy Share this post Link to post Share on other sites
ljk Report post Posted March 25, 2019 I do have a power trip hammer at my Colo. home, but won't be there until June. It runs off a electric motor to a flywheel and has trip lever which can be foot or hand operated. It has a adjustable drop. It weighs about 300 lbs. I just picked it up in June 2018 and broke my femur July 2018 I Can't remember the mfg. I't was in wonderful condition with all the paint on it. If I can remember the name i will let you know. The attachment is very close Let me know if interested tx Lynn Share this post Link to post Share on other sites
Northmount Report post Posted March 25, 2019 19 hours ago, ljk said: I do have a power trip hammer That's a lot of overkill for tooling leather or setting rivets or snaps! More suitable for a blacksmith shop. Tom Share this post Link to post Share on other sites
Northmount Report post Posted March 25, 2019 (edited) For general information about power mallets, posts found on leatherworker.net see https://www.google.com/search?q=power+mallet+site%3Aleatherworker.net&ie=utf-8&oe=utf-8 Tom Edit: There is a Facebook page for support. I see people have been selling or asking to buy. "Power Mallet Leather Carvers" Edited March 25, 2019 by Northmount added FB group Share this post Link to post Share on other sites
buzzardbait Report post Posted March 28, 2019 Someone a while back suggested a tool named the Gravermax made by GRS as an alternative. Share this post Link to post Share on other sites
wolfsdenleather Report post Posted March 30, 2019 On 3/28/2019 at 3:35 PM, buzzardbait said: Someone a while back suggested a tool named the Gravermax made by GRS as an alternative. Thanks bud. I will definitely check that out. Share this post Link to post Share on other sites
Deuce Report post Posted September 1, 2019 Any luck in finding a power mallet? I am looking for one as well .... Share this post Link to post Share on other sites
Studio-N Report post Posted September 2, 2019 just use a reciprocating carver. You may have to cut off most of the handle for the stamp to fit in the collet, so don't use your best tools. Share this post Link to post Share on other sites
