Members blue duck Posted January 3, 2020 Members Report Posted January 3, 2020 Got a customer wanting a square ring 1 1/2" ID. Something old looking. Maybe just antique brass. But at this point I would take about anything Looked everywhere I know and can only find rectangles that wide. Any ideas? Or maybe know of someone that could make one? Thanks folks! Quote
Members EB 509 Posted January 16, 2020 Members Report Posted January 16, 2020 just saw your post. I have several either solid brass or nickel plate almost square loops 1 .1/4 x 1 1/2 made of 1/4 stock.y I also found a old hand forged rusty one that is 11/2x15/8 also 1/4 inch stock. if you can use any of those let me know and will send pics Quote
CFM chuck123wapati Posted January 16, 2020 CFM Report Posted January 16, 2020 I make mine from brass rod its pretty easy to do. Quote
CFM Frodo Posted January 16, 2020 CFM Report Posted January 16, 2020 if no rod like Chuck suggests get a round brass loop and heat beat it square Quote
Members Ken Nelson Posted January 20, 2020 Members Report Posted January 20, 2020 Weaver Leather has them and they don't cost much. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.