CFM chuck123wapati Posted January 28, 2020 CFM Report Posted January 28, 2020 Just finished this for a friend. Used my Anaconda as a pattern but its going on a Taurus The only dif is the Taurus is 3/4 " longer. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Contributing Member JLSleather Posted January 28, 2020 Contributing Member Report Posted January 28, 2020 That's a bit different layout - I don't mind that one bit Looks like once a fella got used to the different snap config, should work right fine. Might try makin' one with the back laminated... prolly hold it's form longer. And if I was being picky, I'd offer ta send ya some lighter thread. I don't mind light thread on dark leather (even white on black) but I aint never been a fan o dark thread on lighter leather. Personal preference is all Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
CFM chuck123wapati Posted January 28, 2020 Author CFM Report Posted January 28, 2020 41 minutes ago, JLSleather said: That's a bit different layout - I don't mind that one bit Looks like once a fella got used to the different snap config, should work right fine. Might try makin' one with the back laminated... prolly hold it's form longer. And if I was being picky, I'd offer ta send ya some lighter thread. I don't mind light thread on dark leather (even white on black) but I aint never been a fan o dark thread on lighter leather. Personal preference is all Thank you for the compliment its basically my 1911 pattern lengthened to fit . Yea the dark thread probably wont happen a gain lol. But its pretty stiff due to double thickness on both sides. I wet formed it and the back doesn't show much from the cylinder. Its about 10 oz leather The fat flap might warp a bit and the snap configuration is still being thunk about as it does double duty as a shoulder holster or belt holster, I guess time will tell, after next Elk season I'll know for sure. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Contributing Member JLSleather Posted January 28, 2020 Contributing Member Report Posted January 28, 2020 25 minutes ago, chuck123wapati said: But its pretty stiff due to double thickness on both sides. Then you already got there... couldn't tell from the pic. Never mind me then! Course, when I was younger and doin more huntin'... we didn't need all that fancy stuff. We wanta deer, we just runnim down an snap 'is neck Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
CFM chuck123wapati Posted January 28, 2020 Author CFM Report Posted January 28, 2020 36 minutes ago, JLSleather said: Then you already got there... couldn't tell from the pic. Never mind me then! Course, when I was younger and doin more huntin'... we didn't need all that fancy stuff. We wanta deer, we just runnim down an snap 'is neck LOL yea I used to run up along side of the Antelope and pinch em to see if they were fat enough if so I would just slide a noose around their neck an lead em back to the truck. I really appreciate your opinion of my work and hope to get close to your quality one of these days. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members dikman Posted January 28, 2020 Members Report Posted January 28, 2020 Sorta looks like a modern version of a Slim Jim. Very neat. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members noobleather Posted January 29, 2020 Members Report Posted January 29, 2020 What dikman said. Looks great I like the two tone effect! Thanks for sharing Quote
CFM Frodo Posted January 29, 2020 CFM Report Posted January 29, 2020 I likely thumbs up !!!! Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM chuck123wapati Posted January 29, 2020 Author CFM Report Posted January 29, 2020 (edited) 16 hours ago, dikman said: Sorta looks like a modern version of a Slim Jim. Very neat. Now that you mention it yes. Thank you! a guy could sew a faux strap around it to enhance that look I'll bet 7 hours ago, noobleather said: What dikman said. Looks great I like the two tone effect! Thanks for sharing Thank you. The two tone will even out I rubbed it down good with Feibings golden mink oil but and it sinks in faster where the leather isn't flexed 3 minutes ago, Frodo said: I likely thumbs up !!!! Thank you! Edited January 29, 2020 by chuck123wapati more info Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted February 1, 2020 Author CFM Report Posted February 1, 2020 Finished the shoulder harness No dye except for bison tan an the small strap mildly stamped and burnished, used a bit of edge kote. Finished with fiebings golden mink oil Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.