16 Ounce Strap Supplier, 1907 Leather Sling Build

[courtney]

And actually I could sell you some of this hide if you wanted

[MikeRock]

Make sure the sling customer pays first.....before he sees what a mistake he made!  I just tried a chunk of 16oz on that '03-A3 and it's rather tight.

[chuck123wapati]

The original slings weren't that thick 1/4". They are just one layer of heavy veg tan leather. I have replaced the leather on a couple of them and they wont stretch unless you pull a truck or something with them maybe. 

17 hours ago, AlamoJoe2002 said:

Yes Stephen1, that is the sling.

Chuck123wapati, I'm still looking for the original specs. I asked the shooter if 13oz would work for him...he restated he wanted 1/4" thick leather. What is the typical oz leather you have seen on this 1907 sling?

Now I'm concerned I may need to get the frogs made as the hardware may now be too short to hook to a thicker sling.

Good info Gents! Keep it rolling!

JOE

I see someone has already given you the thickness of the originals. Just my thoughts on this project, the original 1907s were built to fit every body type and every rifle type so they were perforated with holes from one end to the other. If you really want to reduce the stretch then I would suggest building it with his custom length in mind, much fewer holes,  and also you would be able to form the leather at the sling swivels this would do what he wants. Thicker leather will not bend tightly at the sling swivels and is the most common problem with these slings, they dry and break the leather from bending at the swivels and imo is where the "stretch" or actually slack comes from. you can see in the picture posted by Steven1 the leather at the front swivel is is bent as tight as it can get when not used but when a guy really gets the sling around his arm and ready for use he has to pull this slack out and keep it out while aiming that is where his "stretch " is. I have used these for years on all my rifles, my dad a wwII vet wouldn't use anything else and taught me the same lol they are the best again IMO. Good luck with your project and shoot use some pics! 

Edited July 2, 2020 by chuck123wapati

[AlamoJoe2002]

I found a few construction drawings dated Nov 1950...which I inserted below...footnote citation/credit goes to Turner Saddlery for providing the details of the 1907 sling. I'm assuming skiving is done on one side only at the fold over for the buckle. It appears the skived side is the bottom inside shown on the right side of the edge view in the top detail. Does this sound correct?

JOE