Why would someone want a manual sewing machine?

[$$hobby]

fwiw,

in my cousins work clothing store she had an old singer treadle machine along with some other antiques.  It was used to hem pants/jeans and Carharts.  If you are not aware of Carharts, they were heavy canvas work clothes.  So going over the seam most machines would stop, but the treadle could skip and continue.  Some of the heavy work jeans also had alot of material on the seams.

She also had another one at home that was used.  I wanted that machine for some of my sewing projects, but it wasnt available back then.

we are becoming more and more dependent on the internet and electricity...just wait for you to loose both and see what will happen..

 

 

Edited July 17, 2020 by $$hobby

[Sturme]

I opted for my tippmann over a powered swing machine for numerous reason. it is quieter than a powered machine, can easily sew over 3/4 of an inch of leather ( i have personally sewn a 1 inch piece for a custom holster, long story on that. i sewed 5 stitches before i got nervous and stopped then drilled the rest of the holes on that part and hand stitched). portability, control ( i control how fast or slow i want with no real limits), price wasn't not a real issue as by the time i was done at tippmann i had spent right at 2200.00 us for it all. overall i am happy with my hand crank machine and its a nice retro look in my shop. another reason is i am only a couple hours from tippmann. so i was able to go pick it up and even seen them testing out my machine and actually got to take a trial run with my tippmann before they boxed it all up and they even helped my load it and the cobbler bench i bought or it. they were polite and treated my very well while i was there. I like that they treated my like i was a person up there taking the time to answer the few questions i had, showing me around the place a little bit. my only real complaint about my tippmann is that on some light leather projects will tear them up. but that is my fault. i have it set to sew holsters and thick leather projects, and i do not want to take the time to set it up for lighter leather that i can hand sew easily. eventually i will get a sailrite to do my light leather projects and garment leather.

Edited July 17, 2020 by Sturme

[jcuk]

Better chance of hitting existing stitch marks on repairs it's not going to get away from you, i have three machines a singer 45k in storage somewhere never really got to grips with it lays down a nice stitch though. Also have a Tippmann Boss don't really use it much can be mare at times but once you have set up right it also lays down a nice stitch have used it for control of the above said hitting existing holes reason i don't use it much not a fan of bonded nylon thread believe some do run polyester thread through them not tried it myself. The third machine i have, i got from a member here  Constabulary his great restoration of the DVSG/Pearson no6 this machine is the one i should have got years ago when i had the chance  and yes i know all three machine are built to handle heavier work. Thats why when times times get a bit better for everyone the Tippmann Boss maybe for sale in the near future. As its not for sale just yet hope i have not broke rules of the site.

And i am also a big fan of hand stitched work most of my work is hand stitched but a few jobs are tedious and you can't charge a the hourly rate for them because customers can just buy new cheaper hence the need for a machine for certain things. One job used to take me anything between 11/2  to 2 hours even with a manual its around a 1/3 of the time now and what the job is makes no sense doing it by hand nobody really would notice or care its hand stitch or not.

 

 

Hope this helps

JCUK

 

Edited July 18, 2020 by jcuk

[CloverJack]

Hope everyone enjoyed their weekend, 

There's a lot of great information here so thanks guys. The big selling points for me were:

The noise reduction (I pretty much only get my hobby time in when my 2yo gets to bed)

Whitaker's comment on outlet availability and breaker troubles (which until I get a new place, hopefully by next summer, that's something I'll have to deal with)

Sturme's idea for setting up with the two separate machines for heavy & light duty work, and it wouldn't be as cost prohibitive as powered machines

And I'm sure the more I work with one, the more I'll realize the other benefits mentioned in the thread.