Geotech1 Report post Posted July 23, 2020 Hi all i would like to have a go at making leather suspenders, would anyone have a link to a pattern please. thanks Steve Quote Share this post Link to post Share on other sites
Handstitched Report post Posted July 24, 2020 @Geotech1 G'day, in all honesty I'm a bit worried about googling 'leather suspenders' , not sure what I'll end up with, just kidding I assume you mean leather braces? I did find this: https://www.pinterest.com.au/pin/125960120801409707/ Theres also this: https://leatherworker.net/forum/topic/10714-leather-suspenders/ hope it points you in the right direction . Are you from Perth Scotland or Perth Western Australia ? HS Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted July 24, 2020 On 7/23/2020 at 4:24 AM, Geotech1 said: Hi all i would like to have a go at making leather suspenders, would anyone have a link to a pattern please. thanks Steve i made a set last year but i didn't have a pattern either had to make one, it wasn't much just a pattern for the back piece. They are pretty simple to make, just straps mostly I can post some pictures if it would help. Quote Share this post Link to post Share on other sites
Wild Bill46 Report post Posted July 24, 2020 Yes as Chuck 123 says very simple ! I' too have made a couple of sets now . Just make the straps, lay them out as they will be when wearing, and go from there, even without a pattern , Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted July 25, 2020 I've made some pretty fancy ones in the past but a pair I made a couple of weeks back would be about as easy a design as you could get I think. Basically its just 2 belt straps with buckles for adjustment and a piece to connect them at the back. I managed to get a couple of pics of the customer wearing them. Quote Share this post Link to post Share on other sites
Frodo Report post Posted August 2, 2020 Almost done with a pair Quote Share this post Link to post Share on other sites
Geotech1 Report post Posted August 10, 2020 Thanks everyone who replied, really appreciate your response. cheers steve Quote Share this post Link to post Share on other sites