441 drop down edge guide with flat guide

[Parott1]

Does anyone know where I can find the drop down guide for a cb4500 with a flat edge guide?  The only guides I can seem to find come with the roller edge.   
 

My machine isn’t predrilled for the drop down guide, so I need to drill holes as well.  Is there an after market knob that will work with the lifting mechanism since the stock one is kind of bulky?

 

thank you 

[CowboyBob]

Jude,

Uwe makes these up.https://uwe.store/collections/featured-items/products/ux441-manual-foot-lift-extension-lever

Or you could just always use the foot lifter which works easier for me.

[Joon1911]

Uwe  also sells an edge guide that comes with both the roller and flat edge guide.  It’s the same one I use made by Kwok Hing 
 

https://uwe.store/collections/edge-guides/products/ug441k-edge-guide-kit

Edited August 27, 2020 by Joon1911
Typo

[dikman]

I made a simple bracket to attach the edge guide using the existing holes as I couldn't see the point in drilling extra holes.

My edge guides came with a small fitting to replace the roller and provide a straight edge, although it's pretty short. Didn't yours have this?

I also made a lifter extension, like Uwe's, but found it was a nuisance to use, so I made up a lever system to use a left-foot-operated lever. As Cowboy Bob said it is easier to use (given the heavy springs in the 441 machines). I've posted photos in assorted threads.