Members Onsite Tack Posted February 6, 2008 Members Report Posted February 6, 2008 I have a challenge. When I have a large spool of thread on my sewing machine, as the spool moves in a circle, extra lengths of thread fall out or off the spool, ending up wound around the bottom of the spool and messing things up. When I bought my sewing machine, the dealer gave me some tubular netting that fits around the spool and keeps this from happening. However, he did not give me much of this. I am looking for the same thing or a substitute. All ideas welcomed. Thanks. Kathy Quote Kathy
TracyMoss Posted February 6, 2008 Report Posted February 6, 2008 Kathy, I'm not sure my machine has a thread stand. The spool sits stationary and the thread runs up through an arm with holes in it, so the thread is pulled up vertically above the thread. Quote
Drac Posted February 6, 2008 Report Posted February 6, 2008 try using grape bags. the netting kind of course. oo! or maybe a hairnet. Quote frissenfrassenmussafrussen...
Ambassador broncobuster Posted February 6, 2008 Ambassador Report Posted February 6, 2008 I use the top elastic part of old socks and slip it over the spool. once it get past half a spool it will hopefully stop unraveling. I know i can be a pain when your sewing n the thread breaks cause its wrapped around the spool base lol. Quote
Members Duke Posted February 6, 2008 Members Report Posted February 6, 2008 steal your wife/mothers nylons and put the tread spool in that.use a garbage bag twist tie to hold it closed at the top, but open enough that the thread can still be spooled out. not pretty, but functional. Quote Duke When I stand before God at the end of my life, I would hope that I would not have a single bit of talent left, and could say, "I used everything you gave me." ~Erma Bombeck
Members Skipknives Posted February 6, 2008 Members Report Posted February 6, 2008 Hay guys just easedropping on this,,i was wondering if the thread drop was from spool chatter,, at the hardware store they sell long brush stock the goes under the front door to keep dirt out,, what would happen if a stretch of that was laid aginst the spool,, i don't know if it will work ,,just a thought,,C YA Quote Skip Slocum Phoenix Arizona http://skpslocum.googlepages.com/home
Members Randy Cornelius Posted February 6, 2008 Members Report Posted February 6, 2008 Go to a large fabric store and they sell nets that are made for spools of thread. I have several that my wife got for me. They work very well in keeping the thread from falling off the spools. Randy Quote Randy Cornelius Cornelius Saddlery LaCygne, Kansas Randy & Riley Cornelius Ride Hard, Shoot Fast and Always Tell the Truth...
Members greg gomersall Posted February 6, 2008 Members Report Posted February 6, 2008 Pull a ladies nylon stocking over your spool of thread with a small hole in the top for the thread to come out through. This will hold it in place while also allowing you to see your spool. Greg Quote
Members Onsite Tack Posted February 9, 2008 Author Members Report Posted February 9, 2008 Thanks for the great ideas. Grape bags - I never thought of those. And, the fabric store - I will check them out. I had thought of stockings, but hadn't gotten to trying it out. Kathleen Quote Kathy
Members Kevin Posted February 9, 2008 Members Report Posted February 9, 2008 Stockings, I love that, I've been using paper and a rubber band. I'm gonna buy me some L'eggs on the way to work. This site is so fntaaastic. Kevin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.