Old Coach Saddlery Report post Posted January 5, 2021 (edited) I am searching for the screw for the 900b presser foot. I have 2 of my own machines but this is for the one at my work. I took one of mine down to the local hardware store. 4mm to small and 5mm to big. Almost threaded in the 10x32 but not quite right. I will call Tony Luberto if I have to. I was hoping someone would have the right answer. Edited January 6, 2021 by Northmount added info to title Quote Share this post Link to post Share on other sites
Northmount Report post Posted January 6, 2021 Moved to Leather Sewing Machines Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted January 6, 2021 Hoffman Brothers in Chicago? They handle the Ferdco machines. glenn Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted January 18, 2021 Call Campbell Randall they’re familiar with these machines! If it’s like mine, it’s based off of a Seiko! On 1/6/2021 at 4:58 PM, shoepatcher said: Hoffman Brothers in Chicago? They handle the Ferdco machines. glenn Worst costumer service of anyone I’ve ever dealt with... Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted January 18, 2021 Really. what went wrong?? I would like to know!! glenn Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted January 19, 2021 17 hours ago, shoepatcher said: Really. what went wrong?? I would like to know!! glenn No call backs for weeks! I felt like I was stalking them, calling every couple days! Quote Share this post Link to post Share on other sites
Old Coach Saddlery Report post Posted January 19, 2021 I have heard that about Hoffman Brothers. My machine is based off a Consew 794R. I have a screw coming from another manufacturer that I hope will work. Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted January 19, 2021 3 hours ago, turbotexas said: No call backs for weeks! I felt like I was stalking them, calling every couple days! Let's try to figure this out using JavaScript expressions... Function (H.B.) { If {they were closed, or short on help, due to the Pandemic when you called} {call again | send email} Else {too busy in the shop to answer phone, email, or voice messages} {give up} } Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted January 27, 2021 On 1/19/2021 at 10:53 AM, Wizcrafts said: Let's try to figure this out using JavaScript expressions... Function (H.B.) { If {they were closed, or short on help, due to the Pandemic when you called} {call again | send email} Else {too busy in the shop to answer phone, email, or voice messages} {give up} } What are JavaScript expressions??? Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted January 28, 2021 On 1/26/2021 at 10:34 PM, turbotexas said: What are JavaScript expressions??? JavaScript is a plain text programming language for websites that are interpreted by your web browser when you load a web page. They permit things to change on demand, like text size, or to open and close drop down navigation menus, or to highlight a particular amount of text, or to tell you how many characters are left in a text input box. There is much more that we do with JavaScript, but those are some common functions. The layout I used is typical of JavaScript "functions." Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted February 14, 2021 No, still have terrible service! I ordered $477.00 in presser feet for a new to me Juki 2000 Bull and they’re significantly shorter! Been waiting several weeks on a resolution! No calls or replies to emails! Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted February 14, 2021 Far left is what was on my machine! The two middle toes matched... Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted February 14, 2021 Can't you lower the presser bar and live with the shorter outside foot? Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted February 14, 2021 42 minutes ago, Wizcrafts said: Can't you lower the presser bar and live with the shorter outside foot? I don’t want to have to change things every time I switch feet??? Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted February 14, 2021 5 hours ago, turbotexas said: I don’t want to have to change things every time I switch feet??? I wonder if Cowboy cb4500 feet will fit it and reach far enough forward? I can send you my spare foot if you want to try it. Quote Share this post Link to post Share on other sites
DavidMillsSaddlery Report post Posted February 15, 2021 19 hours ago, Wizcrafts said: I wonder if Cowboy cb4500 feet will fit it and reach far enough forward? I can send you my spare foot if you want to try it. I’m sure any Juki setup will fit, I was just wanting to keep it Ferdco... Quote Share this post Link to post Share on other sites
