Members Alexis1234 Posted April 4, 2022 Members Report Posted April 4, 2022 On 3/25/2022 at 3:18 AM, fivewayswelshcobs said: I would never put metal prongs against any animal so all my harness and collars etc is lined as is most of what I've seen . The only evidence of no lining is some which has been botched by an amateur or foreign made. I do not do it that way...However, on I've seen it done on work harness. Quote
ButtonLady Posted April 4, 2022 Author Report Posted April 4, 2022 On 3/25/2022 at 4:18 AM, fivewayswelshcobs said: I would never put metal prongs against any animal... If set properly with a good die, the prongs are well buried. Aside from that, please note that the spots in this example are set with exceptional care (!) —the direction of the prongs is perfectly consistent: The raised center of a machine die pushes the prongs upward into the material (leather, Biothane, etc.): Prongs that are just flattened? Absolute total agreement with you. Quote Sewing Machines: Juki DNU-1541 and waaay too many home machines and sergers... Button Machines: Osborne, Wade, Defiance, Maxant, Handy Jr. #1 and #20, Fasnap PM5 (and too many dies to count)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.