Jump to content

Recommended Posts

  • Members
Posted

:spoton: The World was waiting for someone like you  :notworthy:   :lol:

~ Keep "OLD CAST IRON" alive - it´s worth it ~

Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted

Thanks for that, i have a book on gears and gear construction, i believe the gears these days are not constructed like this anymore, indeed in the gearbox of the 29k the gear profile evolved with different tooth profiles for the 3 gear used in production.

For this reason, i decided to start modelling the gears from actual measurements of a good rack and pinion gear. This way it won't get bogged down by calculation that if slightly wrong will not product the right profile.

I can get these 3d printed in plastic and then cut in steel by a friend. But only when they fit and work.

  • Moderator
Posted
2 hours ago, 29k15engine said:

Thanks for that, i have a book on gears and gear construction, i believe the gears these days are not constructed like this anymore, indeed in the gearbox of the 29k the gear profile evolved with different tooth profiles for the 3 gear used in production.

For this reason, i decided to start modelling the gears from actual measurements of a good rack and pinion gear. This way it won't get bogged down by calculation that if slightly wrong will not product the right profile.

I can get these 3d printed in plastic and then cut in steel by a friend. But only when they fit and work.

Once you finalize the 3D coordinates and create a functional part, please start a topic about it in our 3d printers and lasers sub-forum. You can even upload a file for others to use.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

Going to get the fit right with lots of testing, then hopefully will have an STL file for people to try.

 

The straight forward job would be to provide matching gears and racks.

However the harder but more rewarding job will be to provide parts that can be used with genuine singer rack or singer gears therefore being equal in fit to OEM, thats the bit that will take a little time.

 

Posted
On 6/28/2021 at 2:15 AM, 29k15engine said:

 

 

 

 

2ndracktrymeasure.JPG

Good job on your progress!    Your measurements show a pressure angle of 9.2 degrees, while many/most older gears were 14.5 degree and most gears used today are 20 degree.      Obviously non of the readily available involute-profile gear cutter tooling would be of any use - probably why it’s rare to find anyone who has done this.

 I find the tooth profile on the rack interesting - involute-profile racks have straight sides where the pinion actually makes contact, where the slight curve on the upper portion of the tooth shows these are pretty unique compared to most older gears profiles.

I’m wondering out loud if this is a cycloidal-profile style of gear such as was used in clockmaking.   On the following page it mentions that on pinions with few teeth the involute-profile becomes difficult to manufacture, and cycloidal makes more sense.     https://www.csparks.com/watchmaking/CycloidalGears/index.jxl

Looking forward to seeing progress!
 

 

  • Members
Posted (edited)

Hi Don, feel free to think out loud, having modelled the gear as well I have tweaked both to do the 3d print, here are the latest drawings. I got the gear and rack to mesh with 0.001mm and no interference on full rotation with all 3 gears in correct position, so we will see when my friend pops round with the prints.

In my book it talks about lantern gears which were very round. My final drawings are not as round so we will see how they actaully mesh.

 

singer shuttlebeta.JPG

2ndracktrydelta.JPG

Assem6.JPG

Edited by 29k15engine
  • Members
Posted

Just found from a supplier I can get parts

8608 Following Pinion for both 29k1 but also following pinions for 29k15 and the like.

8599 Small rack

plus

8600 long rack!! which I may be able to be modified to fit a 29k15 with an adjustable rack rod.

These are all new parts.

Will keep you informed on these as it is another direction to get these parts working the older machines.

Here is a picture from the supplier of part 8600 in stock.

 

39aa63c6-bc67-4c95-9b69-f1aee014f9d3.jpg

  • Moderator
Posted

Awesome find!

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted (edited)

Ok so my pal dropped of an evelioe with the parts he made on his new 3d printer.

I was hoping for the best but like all things engineering prepared for the worst... however they fit!! Like a glove

I need to tweak the end of the gear tooths a little but first fit is good. As the tooth end is a little too accurate they need a micron or 2 more clearance.

Have a look, comments and critique welcome.

20210629_165945.jpg

20210629_165939.jpg

20210629_165249.jpg

20210629_170625.jpg

Edited by 29k15engine

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...