ogopogo Report post Posted June 26, 2021 Hi guys and girls, I am fairly new and am having a problem with glue, I researched and settled on Lepages heavy duty contact cement. I bought a pint and poured some into my glue jar ( home made with a brush sealed thru lid ) after a few days the glue separated with a layer of thin liquid on top, tried mixing it with little success. I believe the top and brush are air tight. I tried a small test but it does'nt seem to hold much. Any suggestions would be appreciated. Terry Quote Share this post Link to post Share on other sites
mike02130 Report post Posted June 27, 2021 I once used a clear jar for Weldwood contact cement and had a similar problem. Now I use a brown jar and no problem. I figured it doesn't do well with light. Quote Share this post Link to post Share on other sites
Dwight Report post Posted June 27, 2021 NEVER had that kind of problem with weldwood May God bless, Dwight Quote Share this post Link to post Share on other sites
ogopogo Report post Posted June 27, 2021 Thanks for your replies, the clear jar might be the problem. Terry Quote Share this post Link to post Share on other sites
Rahere Report post Posted June 29, 2021 Separation in light suggests bacterial degradation. Try ensuring your bottle's thoroughly cleaned - I have an Instant Pot cooker which is all but an autoclave in steam mode. Quote Share this post Link to post Share on other sites
JayEhl Report post Posted June 30, 2021 13 hours ago, Rahere said: I have an Instant Pot cooker which is all but an autoclave in steam mode. LOL! I was trying to think of what else I could do with our paperweight! All I ever made with it is soups and well... that got boring after awhile. Quote Share this post Link to post Share on other sites
