beltbuckles Report post Posted October 11, 2021 so i have piles of chrome tanned leather in my garage... in the past, i had them in my basement and i got some mold so i threw a bunch away.. now that i moved and they are in the garage.. i had some pieces that kinda stuck together cause it gets hot down here. now, im not sure if the color transfered off one onto the other? or if its just mold again? or its just dirt or grimey? i hope it just transfered color, but not sure... when unfolded the leather, it stuck within itsself and i had to somewhat peel it off of itsself, nothing major.. thoughts? ill try to get some pics Quote Share this post Link to post Share on other sites
LatigoAmigo Report post Posted October 11, 2021 23 minutes ago, beltbuckles said: thoughts? Is it worth the trouble? Personally, I'd trash it. Quote Share this post Link to post Share on other sites
beltbuckles Report post Posted October 11, 2021 (edited) 1 minute ago, beltbuckles said: 2 hours ago, LatigoAmigo said: Is it worth the trouble? Personally, I'd trash it. 1 minute ago, beltbuckles said: 1 hour ago, fredk said: 1 minute ago, beltbuckles said: Edited October 11, 2021 by beltbuckles Quote Share this post Link to post Share on other sites
beltbuckles Report post Posted October 11, 2021 Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted October 11, 2021 Was that tan/brown skin sticking to the cream skin? If so try a little rubbing on the cream one with a clean rag dampened with some isopropyl alcohol and see if it removes it. The tan brown coloured one looks to be a sprayed semi alanine effect which would have a top coat that sometimes does not adhere as well. Rubbing that one would probably remove more of the top coat and make a mess so be careful. Quote Share this post Link to post Share on other sites
beltbuckles Report post Posted October 12, 2021 2 hours ago, RockyAussie said: Was that tan/brown skin sticking to the cream skin? If so try a little rubbing on the cream one with a clean rag dampened with some isopropyl alcohol and see if it removes it. The tan brown coloured one looks to be a sprayed semi alanine effect which would have a top coat that sometimes does not adhere as well. Rubbing that one would probably remove more of the top coat and make a mess so be careful. as long as its not mold, im not too worried about it.. some of it stuck, but im not sure if that is were the marks were from... have you had anything like this? Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted October 12, 2021 35 minutes ago, beltbuckles said: have you had anything like this Yes on badly packaged stock when I moved years ago. With some of these leathers they have a fair amount of what is called feel agent (silicons/waxes etc) and some not enough. Most should be fairly slippery to the touch but amazingly a lot of cream colours don't have much of it applied. Some whites get dirty just lookin at them I reckon. Quote Share this post Link to post Share on other sites