RICHARD WALKER - Industrial Sewing Machine Man

[sbrownn]

2 hours ago, Samv said:

First thanks to those of you taking the time to leave supportive comments, I really appreciate it. 

This afternoon, after many calls, including those from Bob (thank you) I finally took delivery, although I had to still sweat it till the end, after paying over $100 for lift gate service and after Price Truck lines were repeatedly advised there was a lift gate drop-off, the driver still showed up without. So I had to call on a good neighbor to help me unload it!

The table seems ok, but it's laminate with big layer chunks chipped off under. Seems super cheap Chinese work. Everything else at first glance seems in order but haven't assembled it all yet.

When you add time lost from work it would go a long way if Bob decided to throw in some extra needles and thread, just to sweeten three days of pricey aggravation!

I guess I would contact Bob and request a replacement for the table.

[Wizcrafts]

On 1/6/2022 at 5:11 PM, Samv said:

after paying over $100 for lift gate service and after Price Truck lines were repeatedly advised there was a lift gate drop-off, the driver still showed up without.

Have you contacted the delivery company about getting a refund for the lift gate they didn't send?

[dikman]

4 hours ago, Wizcrafts said:

Have you contacted the delivery company about getting a refund for the lift gate they didn't send?

I was thinking the same thing.

[kgg]

On 1/6/2022 at 10:11 PM, Samv said:

after paying over $100 for lift gate service and after Price Truck lines were repeatedly advised there was a lift gate drop-off, the driver still showed up without. So I had to call on a good neighbor to help me unload it!

The table seems ok, but it's laminate with big layer chunks chipped off under.

Someone needs to refund the Lift-Gate fee and the case of beer for the neighbor.

On 1/6/2022 at 10:11 PM, Samv said:

The table seems ok, but it's laminate with big layer chunks chipped off under.

Should contact the retailer to have it replaced.

If you made the shipping arrangements then contact the shipper if the retailer made the shipping arrangements then contact them for both the Lift-Gate fee and the table replacement.

kgg

 

[blksmith]

Bought a Cowboy Outlaw from Richard 3 weeks ago.Delievery was right on and had good tracking. Packaged very well no problems.

Had some issue's with skipping stitches so I called him. Had a couple things to try and said to call back if they didn't work.Didn't work so I called him back aand he hooked me up with a guy named neil. Neil knew exactly what was wrong and clued me in.Its working fine now,Iwoud buy again.

Take care 

TJ Smith