Silverd Report post Posted February 25, 2022 Hi Anyone have a laser capable of cuting 6-7oz Hermon Oak? I want precuts and will pay for all cost. Thank you! Silverd Quote Share this post Link to post Share on other sites
Hairic Report post Posted February 26, 2022 I know the member Gulrok has a laser that will do it, You might try and message him. Quote Share this post Link to post Share on other sites
Gulrok Report post Posted February 26, 2022 Hey that's me. I do have a laser that can do it. Send me a PM with your design. Quote Share this post Link to post Share on other sites
Hairic Report post Posted February 26, 2022 1 minute ago, Gulrok said: Hey that's me. I do have a laser that can do it. Send me a PM with your design. Lol ... Nice! Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 2, 2022 Hi Are you laser cutting for hire still? Silverd Quote Share this post Link to post Share on other sites
Gulrok Report post Posted September 3, 2022 17 hours ago, Silverd said: Hi Are you laser cutting for hire still? Silverd Yeah absolutely. Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 4, 2022 Ok, great I would like to send you a set of patterns. These are handcut cardboard templates so they will need to be digitized then edge smoothed...I think that's close to what the process is referred to. If this is within your capabilities, I'd also include the 3-4oz cow leather from which the mini waller parts can be cut from. These are the parts. Silverd Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 4, 2022 It might be more effective if we have phone conversation. I have two projects I'd like to advance via laser cutting. This one and a sandal product line that could be significant in volume...possibly. If you're up for a conversation please feel free to call me. Don Earl 805 701 3990 Oxnard, California Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 7, 2022 Are we having communication issues? Don 805 701 3990 Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 11, 2022 Dropped off the grid... Quote Share this post Link to post Share on other sites
Northmount Report post Posted September 11, 2022 @Gulrok You may have missed the above posts. Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted September 12, 2022 On 9/5/2022 at 12:33 AM, Silverd said: Ok, great I would like to send you a set of patterns. These are handcut cardboard templates so they will need to be digitized then edge smoothed...I think that's close to what the process is referred to. If this is within your capabilities, I'd also include the 3-4oz cow leather from which the mini waller parts can be cut from. These are the parts. Silverd Hey Don, Do you have these patterns drawn up in a CAD file? I normally draw up in AutoCad and print to check all is correct then send to the laser to cut. Taking a hand drawn pattern and redrawing into a cad file can be quite time consuming. It is a fair bit quicker to design in a CAD format right from the start. The product above would take me 1.5 to 2 hours to draw up and get exactly right. Once you have a CAD file you can get it cut anywhere you want. Great thing about going this way is that if you want a little wider or longer etc it can be done in just a few seconds Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 12, 2022 Good point...I understand. I was hoping the laser operator can digitize the image then edge smooth . Then create the program the path...but probably not everyone has that capability. I'm not that concerned if my patterns and the resulting program is 100% accurate...at least for now. Thank you Silverd Quote Share this post Link to post Share on other sites
Gulrok Report post Posted September 12, 2022 16 hours ago, Silverd said: Good point...I understand. I was hoping the laser operator can digitize the image then edge smooth . Then create the program the path...but probably not everyone has that capability. I'm not that concerned if my patterns and the resulting program is 100% accurate...at least for now. Thank you Silverd Hey - I didn't drop off the grid. I just didn't have notifications on for this post. On 9/11/2022 at 11:10 AM, Northmount said: @Gulrok You may have missed the above posts. Thank you! Quote Share this post Link to post Share on other sites
Northmount Report post Posted September 12, 2022 1 hour ago, Gulrok said: Hey - I didn't drop off the grid. I just didn't have notifications on for this post. So to those individuals that respond to posts, you should quote a part of the post you are wanting to communicate with the person that made the post, or use the @ symbol followed by the person's screen name so a notification gets sent to them. Example @Silverd Good luck with all your projects. Quote Share this post Link to post Share on other sites
Silverd Report post Posted September 26, 2022 On 2/25/2022 at 6:39 PM, Hairic said: Lol ... Nice! Contact info please. Phone is best to get started. Or call me @ 805 701 3990. California Thank you! Don On 9/12/2022 at 4:14 PM, Northmount said: So to those individuals that respond to posts, you should quote a part of the post you are wanting to communicate with the person that made the post, or use the @ symbol followed by the person's screen name so a notification gets sent to them. Example @Silverd Good luck with all your projects. On 2/25/2022 at 6:37 PM, Gulrok said: Hey that's me. I do have a laser that can do it. Send me a PM with your design. Let's advance the project. Please call me 805 701 3990 Thank you Don Quote Share this post Link to post Share on other sites
Gulrok Report post Posted September 27, 2022 On 9/26/2022 at 11:54 AM, Silverd said: Contact info please. Phone is best to get started. Or call me @ 805 701 3990. California Thank you! Don Let's advance the project. Please call me 805 701 3990 Thank you Don Don I have called you a few times and left a few voicemails. I have also given you my number. Quote Share this post Link to post Share on other sites
