prc77ro

Hi all, it's been some time since I have posted here. I am currently working on a filigree belt with buckstitcing. The issue I am having is that the white surface is cracking in some of the stitches. Is there any way to prevent this? The lace is several years old so that could be the issue or my slits are still to tight. I waxed the flesh side with paraffin and tried opening both sides of the slit with my fid. I even used much shorter lengths of lace.has anyone ever run into this and if so what did you do to prevent it. Im thinking its because the lace is old and the surface is dried out.

The overall shape looks good. One of the strap loops is off on the mountain side of the scabbard. Did you tool either of the designs or are the both just drawn and colored? It maybe the quality of the photos but the colors on the flower side look too strong and wash out the design for me. If you used alcohol based dyes you can thin them down a bit to reduce the intensity.

dI use mainly Angelus Dyes they work well for me. If the Hi-Liter is water based then more than likely that's why it came off, especially if you didn't allow enough time for it to dry. AS Coloring Leather is a great book for dyes, and acrylic dyes and I was wondering if anyone has tried dyeing their piece brown or blue before using the USMC black to get less rub off? Oh one more thing, Neatsfoot oil darkens leather, like really dark if you put too much on. So if you don't mind your dye job being dark then use it, but I use Lexol because it doesn't darken the leather, before and after dyeing.

do you still have the Damascus?

also order a magic eraser form Springfield Leather, it will take dried or semi dried cement off of leather and dont forget the leather bleach too. Sometimes just rubbing with the eraser isn't enough, there will still be a spot where the cement was and you won't see it untill you apply the dye then its too late. Rub with the eraser, then wash and give a good scrubbing in the area where the cement was let dry and continue on.

For the shoulder straps, in my opinion, I wouldn't lace them for comfort reasons, I would guess that once you finish lacing them they would be sorta stiff and would have the potential to rub in the armpit area. It also depends on the look your going for, do you want a refined high end look or are you going for the rugged, used, unfinished look( like a Banana Republic look). I use two different types of finishes on my edges if I want something more than just the burnishing. I'll use Fiebing's burnishing ink in black or medium brown, for this you really just need to have a decent edge, paint it on then either use a burnishing cloth by hand or a cotton buffing wheel to bring it to a mirror finish. The other edge finish I just started using is Fiebing's Edge Kote, Dura Edge. This stuff is awsome, you can paint it on burnished edges if you want or if your cut edges are pretty much perfect when you cut them you can just brush it on. It states on the bottle its flexible, won't crack or peel or rub off once it's dry. It does give a really good finish even if you only sand the edges. As far as the sinew, I have never used it, I have used Nyltex and am not really crazy about it. It's thick doesn't seem to lay as nice as waxed linen. The waxed linen is what I prefer, if I need it thinner i can pull a strand or two out, can't do that with the Nyltex. I know you can do the same with the sinew's so you dont have large stitches on an otherwise small project, keep that in mind. If you really want to be sure and have some scrap around try making an example so you can get an idea of what it will look like. Hope that may help some.

Looks awsome, did one myself so I know how much work you put into it. The color is terrific, I love the old rustic look, and you stiched the cartridge loops too, I chose to weave mine. If I can make an observation for future thought, the ends of the cartridge loops have a row of stitching and then the ends are cut? Why not taper them to match say the stitched ends of the billets and sew them down, may give them a little more finished look but that is just my opnion. You did a terrific job on the entire thing. Can I ask did you line the holsters and/or the belt? and are the Uberti's .45Colt or .45Schofield?

I agree with all the advice given, the only thing i havent seen mentioned here is are you securing your holster in a stitching pony/horse? I also started drilling holes using a harness needle though, and held my sheaths in my had while pushing the needle through. Very, very time consuming. If you have not already purchased AS's The Art of Sewing Leather buy it and read it cover to cover. In the back are plans to build a stitching horse. for about $50-$60 in materials you can make your own and it makes a BIG difference. It's easier to see your overstitcher marks, how straight your awl is and if you practice, practice, practice the instructions in Al's book you'll be able to stitch a saddle stitch without setting down either needle or awl. I am now stitching about a foot every 30-45 min at 6 stitches an inch. I use an awl haft not a saddlers awl, that way I can change blades and its still comfortable in my hands. Also, one more thing to note: when I sharpen and strop my blade I push it along the length of the blade just as the begining of the video shows, so I don't change the angle's on the blade and don't drag it across a stone or even a strop because both will change the angles. I'm not 100% sure but reason tells me that even stroping or polishing the blade still leaves micro abrasions(lines) in the blade and that the awl blade would perform better and with less resistance(drag) if they were in the same direction as the point, if that makes any sense.

Thanks, took me two days to make. If you can make it on your own its cheaper for one, plus then you can customize it as far as the sizes of the holes and how you want to lay it out. It would have been alot easier if I had access to a band saw, then I could have glued everything together and then cut the angles.

I filled two Craftool tool racks, and a home made tool rack that was equal to two of the Craftool racks and decided to make a larger one this past weekend. I had a 4'X6' sheet of 3/4 Birch laying around so I drew up a plan and started cutting. Basically the racked is stacked layers of the 3/4" with the angled sides cut on my table saw. This I had to do in several stages as the rack is about 10" high and my table saw is only a10"(wich only gives about 4 1/2" cut at 90deg roughly) the finished product has a useable space of 19 7/8"L X 8" H which comes out to 9 rows of 23 holes and 8 rows of 24 for a total of (if completly drilled) 399. I left out the center section which leaves me with 323 give or take a hole to fill. now the only problem is it looks half empty! The third photo is my work bench to give a better scale of the rack.

I agree with behind the wire, Craft Japan is seperate from Craftool. There are stamps out there that are goldish in color with either a stamped Craftool or an ink printed Craftool and these are made in Taiwan from what Jim Villwock (Customer Service Manager at Tandy) has told me.

Those are incredible. On the double prong buckle collar how did you attach it, I dont see any stitching?

Thanks for the statement Johanna, I dont blame the mods for having that responsibility, it would like someone going to the Library of Congress and ripping every other page out of all the books.

We are all individuals each with different opinions and different personalities so for everyone who has responded on this post to have the same opinion would be ludicrous. People are going to agreee with certain things and disagree with certain things, it all depends on who you are. When it comes to feeling at home, well, I feel at home in my house and joined Leatherworker.net to learn, improve my skills, ask those who have more experience questions, and maybe make a few friends along the way. I am not trying to offend anybody here but because you contribute, IMHO, doesn't mean you have ownership. If you feel that you should because you do well thats on you. If you contribute to The United Way would you feel ownership? I contribute to the Air Force Aid Society because it helps my fellow Airman when they or their familys are in need but I don't feel ownership. When every member, contributing or not, filled out the registration form and clicked submit you agreed to the conditions of this site. So I do agree with the statement that if you don't like how things are done here then move on. If your posting then you should proof your own work and if you misspell, use incorrect grammar, put up the wrong price then report it ask for it to be fixed or be quiet and accept it. I don't always spell everything correctly and I apoligize to anyone that bothers but this site is for leatherwork so as long as I get my point across I'm happy. This is a great community with wonderful people who are willing to help and give suggestions. Its ok to have differing opinions.

Looks terrific, is it completly Elephant or just the front panel? Any issues molding it?

Ok, I've been watching this thread for a while and did some research. First off there are definitions on the different types of patents and what they cover on the patent website-www.uspto.gov. Second, US Court of Appeals for The Federal Circut:2006-1562 EGYPTIAN GODDESS INC.(Plaintiff) vs SWISA, INC and DROR SWISA has some very interesting info if you have the time to read it all. One of the main things in it is how the courts come to their findings and this seems to hold true with Design Patent infringement::: The Gorham Court then set forth the test that has been cited in many subsequent cases: "f, in the eye of an ordinary observer, giving such attention as a purchaser usually gives, two designs are substantially the same, if the resemblance is such as to deceive such an observer, inducing him to purchase one supposing it to be the other, the first one patented is infringed by the other." I intrepret this as if someone makes a dog collar with shell casings on it and you put it and this schmuck's collar on a table side by side, if it looks or gives the appearence of "his" collar then you have infringed on his design patent. As stated in some older posts, if you use the conchos, do some tooling, maybe add some sheriff star conchos, do the edging and stitching like I know the members of this forum can, then there would be no question in the average joes mind that IT IS NOT this guys collar. And I 100% agree, if he has not started court procedings or you have not received papers from an attourney then I wouldnt even give it a second thought........and I would still sell them because he would have to show in court that yours COULD be mistaken for his.