wlg1908

Can you apply tan-kote using a damp rag without damaging the finish ?

I am just starting to work with snakeskin an when I buy skins, I apply snakeskin conditioner on the skins an I was wondering if I can store the skins in ziplock plastic bags without them growing mold or rotting over time. What is the best way to store snakskin an retain a pliable skin

Can you use gl Can u use glycerin as a conditioner or must u buy snakeskin conditioner ?

Does anyone know where I can buy round alphabet conchos 1 1/2" LOOKING FOR A COMPANY. That offers all letters. Of the alphabet. I am looking for conchos like the one in photo below.

What are the benefits of using a waxpot on your sewing machine. Pro's/Con's

Are there benefits to using a waxpot on you machines. Pro's/Con's

What are the benefits of using a waxpot on your industrial sewwing machine ?

Do you have a pic. c.

I bought some dog collar spikes years ago an I dont remember where I bought them. They are screw back 1 1/4" spikes. Can anyone tell me where I can get them ?

Just take an cut two 1" straps, skive the two ends that will be sewing together an sew

I don't know. She said she likes to do some of her training with a long lead. Do you have any photo's of your leads ?

Point well taking. Thank you

The other I was making leashes an though I would like to make a long one, so I made a 15' leash with a brass snap on the end . I posted it on my facebook page and a dog trainer is interested in it but this is my first time making that long of a leash and have no Idea what I should price it at. Here are a few pic's, tell me what you would charge. The leash is made from 9/11 oz latigo, 15' long and one inch width.

I am trying to make my own water proof/ conditioner. But its not going to well. I was hoping a few of you would have an willing to share your recipe

I just figured out how to do piping without a piping foot. I wish I had a camera to show you but, I just used my right single foot on my machine (CowBoy 4500) an it turned out great. The way I did it, there is no visible stitching. I went to store an looked at factory piping on bags and my way looks just as good. Very happy with the outcome.

Has anyone used this before, an how do you like it ? I am thinking of using this in between the leather an the lining to give my bags body an a soft feel. What do you think ? https://www.ebay.com/itm/223139090576

use a rotary cutter an a strait edge I do this all the time.

I am making some leather chopper mittens out of Moose , an I would like to know, what is the warmest fur pelt to line them with ? My hands get cold easy.

In my opinion the strongest zipper is ykk nylon coil, for your application I would use a #5, the trick to any zipper is to keep your stitches close, what I mean don't stitch 3 stiches per in, go with 5 to 6 per inch an back off on the tention,if using steel tooth zipper make sure the zipper teeth are facing the same direction when putting on the zipper pull ( the teeth should be facing you as you put on the zipper pull. with nylon coil it don't matter

You know the best way to learn this is go to u tube an type in how to install single coil nylon zipper tape. You only need to use one side of the zipper

Take an measure from the top center top the bottom center using a seamstress tape, add 3" an that is the length zipper you will need. Take the zipper an open, run one down one side and the other on the other side. run the ends up the center.. Now stitch the zipper in place.

Go to you local auto parts store an get blue thread lock. Chicago screws won't come out then

Does anyone know where I can purchase #8 zipper, Black with nickle or stainless teeth ? By the yard (bulk)

Does anyone know where I can purchase #8 zipper, Black with nickle or stainless teeth ? By the yard (bulk)