robb01

They were confusing, but the die set for the snap really can only go one way with the flat half on bottom.

When I use the press to do snaps I get a ring around the base of the snaps, not sure what I'm doing wrong. Here's a pic of the issue http://i.imgur.com/4V29JJU.jpg

Any chance of stocking 1.0mm?

Sold?

Where are you located?

I guess that might work, didn't know if I'd have enough room to maneuver, the top width is 7" and the zipper is going to be 6". There may be room

After much insistence, I started making my apprentice (daughter) a purse. I'm not working from a template (probably pretty obvious). I've come to a sort of roadblock. I'm going to try and make a piece for the top, the same width as the gussett that has a zipper in in it. I'm just not sure how to sew it to the top of the purse. I'm thinking I'll make a line of holes like usual, then sew around the top 3 sides like I did for the rest of the bag, but I won't have access under the back edge at the top. Just not sure how to do this. Thoughts?

Rotary and xacto knife here.

I'll take the 64 oz maul

Horween Natural Essex with Havanna Brown Tiger Thread / Black Chromexcel with White Maine Thread

Brown Chromexcel Leather and Havanna Brown Tiger Thread

Looks very nice, what kind of leather is the yellow leather? Did you dye that?

Stitching looks excellent, can you post another of the interior?

Used brown chromexcel leather and Havana Brown Tiger Thread

Thanks to ducjes for the awesome template! This is my first attempt making a traditional bifold wallet.

How much was shipping on the Texas one?

Thanks Tim

Anyone know a supplier that can make snaps with a custom logo engraved on them?

I'm trying to make a leather key holder, but am having trouble finding something similar to a Chicago screw to use. The main problem I'm having is that Chicago screws or sex bolts are too thick for keys to pass through them. I'm trying to find something similar to the pictured screws, but without much luck

Not sure if I'm setting my rivets correctly, but I can see the circular indentation of the rivet post under the cap of the river when I set it, it's a bit hard to tell from the picture, but in the middle you can sort of see the rivet post.

Also found this one for sale nearby, Toyota LZ2-AD553

Mainly small leather goods, wallets, pouches, notebook covers. I use 1.0mm tiger thread at 5 spi, is there something similar for machine use?

Thanks everyone for the information, I'll pass on this one, really looking for one I can use for production.