IHL

For Sale: Theses are all Duncan Custom Aluminum mold guns, Guns are $60.00 each for these cowboy mold guns plus shipping unless marked differently. These will be offered on a first come basis via email only NO PHONE CALLS. Most of these mold guns are extremely hard to get from Duncan as they cast very little today. Let me know what you want and I will let you know what the shipping will be, either Priority Mail or Flat Rate depending on how many or size of gun. 1 x Bond Arms Derringer…NO trigger guard model........$40.00 1 x Davis 38 Derringer….NO trigger guard model...........$40.00 1 x ADB 38 Derringer….NO trigger guard model…not sure what brand or model.......$40.00 1 x Colt 1862 (5 ½”) 1 x Colt 1851 Navy (7 ½”) 1 x Colt 1860 (8”) 1 x Remington 1858 (8”) 1 x Remington 1875 (7 ½”) 1 x Cimmaron Schofield (7”) 1 x Navy Schofield (7”) 1 x LeMat (6 ¾”) 1 x SAA (5 ½”)…not sure of brand 1 x Colt SAA (4 ¾”)……..Broken Hammer Spur……$50.00 1 x Colt SAA (4 ¾”) 1 x Cimmaron Thunder (3 ½”) 1 x Cimmaron SAA (7 ½”) 1 x SAA (7 ½”)….not sure of brand 1 x Ruger Army (7 ½”) 2 x Ruger Blackhawk (6 ½”)…..have two of these 1 x Ruger Super Blackhawk (7 ½”) 1 x Old Ruger Vaquero (4 5/8”) 1 x Ruger BlackHawk (4 5/8”) 1 x Ruger Super Blackhawk (5 ½”) 2 x Old Ruger Vaquero (7 ½”)…..have two of these 1 x Old Ruger Vaquero Sheriff (3 ¾”) 1 x Old Ruger Vaquero Sheriff (3 5/8”)……longer Vaquero cut down to this 1 x Old Ruger Vaquero (5 ½”) 1 x Old Ruger Vaquero Bisley (5 ½”) 1 x New Ruger Vaquero (5 ½”) 1 x Ruger Blackhawk Bisley (7 ½”) 1 x New Model Ruger Single Six (5 ½”) 1 x Ruger Single Six (6 ½’) 1 x Freedom Arms 454 Casull (7 ½”)

For Sale: They are all Duncan Custom Aluminum mold guns, Guns are $55.00 each plus shipping unless marked differently. These will be offered on a first come basis via email only NO PHONE CALLS. Most of these mold guns are extremely hard to get from Duncan as they cast very little today. Let me know what you want and I will let you know what the shipping will be, either Priority Mail or Flat Rate depending on how many or size of gun. 1 x Chiappa Rhino 2” 1 x Chiappa Rhino 4” 1 x New Colt Cobra 2” 1 x Old Colt King Cobra 4” 1 x Colt Python 6” 1 x Colt Anaconda 6” 1 x Kimber K6 (2”) 1 x Kimber K6 (3”) 1 x S&W Mod 60 (38 Spl) 1 7/8” 1 x S&W Mod 60 (357 mag) 2 1/8” 1 x S&W Mod 317 (1 7/8”) 1 x S&W Mod 337 (1 7/8”) 1 x S&W Mod 342 Hammerless 1 7/8” 1 x S&W Bodyguard laser 1 7/8” 1 x S&W Mod 10 (3”) 1 x S&W Mod 13 (4”) 357 mag 1 x S&W Mod 64 (4”) 38 Spl 1 x S&W Mod 15 (2”) 38 Spl 1 x S&W Mod 19 (4”) 357 mag 1 x S&W Mod 386PD (2 ½”) 1 x S&W Mod 696 (3”) 1 x S&W Mod 586 (4”) 1 x S&W Mod 686 (6”) 6 Shot 1 x S&W Mod 686 (6”) 7 Shot 1 x S&W Mod 625 (4”) 1 x S&W Mod 625 (5”) 1 x S&W Mod 629 (4”) 1 x S&W Mod 27 (6”) 2 x S&W Mod 629 (6.5”) I have two of these 1 x S&W Mod 500 (4”) 1 x S&W Mod 500 (9”) 1 x S&W Mod Governor 2 ¾” 1 x Ruger SP101 (2 ¼”) 1 x Ruger SP101 (4”) 1 x Ruger LCR 38Spl (1 7/8”) 1 x Ruger LCR 38Spl (3”) 1 x Ruger LCR 357 mag (1 7/8”) 1 x Ruger GP100 (4”) 1 x Ruger GP100 (4.25”) 1 x Ruger GP100 (6”) 1 x Ruger GP100 (3”) 44 Special 1 x Ruger Redhawk (5 ½”) 1 x Ruger Redhawk (7 ½”) 1 x Taurus 85 (2”) 1 x Taurus 415 (2 ½”) 1 x Taurus 607 (6 ½”) 1 x Taurus Judge PD, 2.75” Chamber with 2” barrel 1 x Taurus Judge Poly, 2.75” Chamber with 2” barrel 1 x Taurus Judge, 3” chamber with 3” Barrel 1 x Rossi R88

The following Randall 132 Strap Cutter is for sale. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily or you can call, number listed below. For sale in Continental USA only. This is a used Randal model 132 strap cutter 14” wide. Please take note that this is a 110v Power machine. This machine is in good condition. Strap cutter is currently set up to cut 10 x 1” wide, 1 x 7/8” wide and 2 x 5/8” wide strips. Strap cutter has the safety clutch lever to engage cutting roller and has safety guard on front with guides, it does comes with instruction manual. Comes with machine, motor and table. Additional spacers and cutting knives available from Campbell-Randall. Shipping weight is about 200bs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $1200 Complete Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.

For sale in Continental USA only. The following Rotary Embossing machine is for sale. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily or you can call, number listed below. This is a used Rotary Embosser ( do not know what make or model it is). Please take note that this is a 110v Power machine. This machine is in good condition, machine comes with one embossing roll (see Picture). Adjustable pressure and will accommodate a 5 ¾” wide piece of leather between guides, can modify the guides to take a 6 ½” wide piece. I do not have the manual for this machine but one is not required, simple to use. Comes with machine, motor and table Shipping weight is about 120bs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $1000 Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.

For sale in Continental USA only. The following Randall Union Lockstitch sewing machine is for sale. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily or you can call, number listed below. This is a used Randall Union Lockstitch machine. Please take note that this is a 110v Power machine. This machine only has about 80 hours on it, machine is in premium condition and was only used for double thickness belts. Black worn off in the arch cover area is NOT from excessive use, it is where your hands, leather, buckles, rings etc are always touching and hitting. I have the instruction manual for this machine. Machine comes complete with table, motor, bobbin winder, 6 x bobbins, 3 x bobbin springs, 3 x extra presser feet, 39 x Number 3 awls, 8 x Number 2 ½ needles and a full set of wrenches. Shipping weight is about 350lbs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Machine costs $7000 + new. Asking $3000, This is the best deal out there for this type of sewing machine in this condition. Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking. Description below is from the Campbell-Randall website. UNION Lockstitch High Speed Leather Stitcher Needle & Awl machine for Heavy Materials For stitching all kinds of leather up to 3/4 inch thick Noted for pulling a very tight seam. FEATURES: Straight Needle & Awl Lock-stitch High Speed (800 SPM). (Operator ability in handling work governs the speed of the machine) Needle Feed/ Jump Foot Extra Large Bobbin holds 100-150 yards of thread (fewer bobbin changes) 12 Inch Throat Sews Up to 3/4 Inch Thick Tight Seams Thread 3 to 12 cord, Left Twist (Wax Optional) Heavy Duty Variable Speed Control for custom or repair work Ideal for high volume production applications APPLICATIONS: Designed for sewing light to heavy weight materials such as leather, plastics, coated nylons, and other non-fibrous materials. Used to manufacture.. Belting, Strap and Harness Work, Gun Leather, Saddles and Other Leather Goods. Sporting Goods including Footballs, Basketballs, Volleyballs and Softballs. Shoe stitching applications in Moccasins, Fairstitching, and Flat Sole work. Luggage stitching on Brief Cases, Bags, and Handles. Optional Accessories: Custom Attachments, Variable Speed Motor and Variable Speed Control available from Campbell-Randall

The following Webbing and Brass line 24 Snaps are for sale. Quantity and pricing are posted on the pictures. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily. 3" Wide natural Cotton Webbing, .125" thick Brass Line 24 Snaps Let us know what quantity you are wanting so we can let you know the cost with shipping. Thanks for looking

The following thread is for sale. Quantity and pricing are posted on the pictures. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily. Let us know what quantity you are wanting so we can let you know the cost with shipping. Thanks for looking

The following items are for sale. Quantity and pricing are posted on the pictures. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily. Let us know what quantity you are wanting so we can let you know the cost with shipping. 7/8" wide chrome plated belt clips 8 x 32 Black Oxide T-Nuts Assortment of buckles Thanks for looking

Campbell Bosworth embosser has been SOLD!!

Randall embosser has been SOLD!!

Alex, Yes it is.

Yes, I do.

Steadybrook, Call me and let me know what you are needing. Thanks.

Regarding the DEER colored thread, the color on the spool is a lot darker than when stitched. This is what is used instead of white as white is way to loud, this color looks white when stitched but not as bright or loud as the white thread.

Ranger Star concho's sold pending payment.

These are the only Concho's we have left for sale. These are Rivet Back Concho's. Thanks for looking

These have all been sold that are on this listing #2. Thanks.

Holster clips are Chrome Plated 7/8" Wide x 2 3/4" long, Sold in packs of 100 at $0.30 each plus shipping. Thanks for Looking.

The following sewing thread are no longer needed for our operations. Thanks for looking.

The following items are no longer needed for our operations. Thanks for looking.

100 x Heart concho's sold to John pending payment , thanks.

All the following items are for sale, as we no longer need them for the products in our operation. Quantity and pricing are posted on the pictures, first come in order of the replies we receive. We will be posting more hardware, thread, t-nuts, snaps etc over the next couple of days. Thanks for looking.

All the following items are for sale, as we no longer need them for the products in our operation. Quantity and pricing are posted on the pictures, first come in order of the replies we receive. We will be posting more hardware, thread, t-nuts, snaps etc over the next couple of days. Thanks for looking.

Did not click "allow to reply to this post" either call or you can email at ian@ihlusa.com Thanks.

For sale in Continental USA only. This is a used Randal model 132 strap cutter 14” wide. Please take note that this is a 110v Power machine. This machine is in good condition. Strap cutter is currently set up to cut 10 x 1” wide, 1 x 7/8” wide and 2 x 5/8” wide strips. Strap cutter has the safety clutch lever to engage cutting roller and has safety guard on front with guides, it does comes with instruction manual. Comes with machine, motor and table. Additional spacers and cutting knives available from Campbell-Randall. Shipping weight is about 200bs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $1400 Complete Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.