Pappys Leather Report post Posted May 26, 2022 What are others using to seal your leather projects? I have used super sheen and satin sheen, using the satin because I do not want a glossy finish. I started usingFiebling's leather sheen spray so my dyes don't get smeared or taken off as what happens when wiping it on. Can Resolene be applied over satin sheen? I just fin8shed a rifle scabbard that I just used oil on it then I put satin sheen on it but thinking I should have used resolene Quote Share this post Link to post Share on other sites
tsunkasapa Report post Posted May 27, 2022 I don't use any of the 'plastic' sealers. I only use NFO or this product from Bee Natural; Leather Finish - 8oz (beenaturalleathercare.com) Quote Share this post Link to post Share on other sites
LeatherLegion Report post Posted May 27, 2022 Try the Tan Kote ...it is resin base , not acrylic . Apply it in light coats . It will allow you to apply conditioners down the road if need it Quote Share this post Link to post Share on other sites
Handstitched Report post Posted May 27, 2022 Depending on the item to be sealed. Either ' seal 'n' shine' on my regular belts, pouches etc. or NFO on the heavier belts items. HS Quote Share this post Link to post Share on other sites
fredk Report post Posted May 27, 2022 I use a local to me version of 'Mop and Glo', an acrylic varnish. Its not unlike Resolene, but I found several years ago Resolene was no longer doing the job [ change of formula maybe ? ] My sealer is thinner than the US version, mine is water thin. Just one coat seals well but I put on two coats Quote Share this post Link to post Share on other sites
