CitroenLVR Report post Posted October 17, 2022 Hi All, Just picked up a Consew Cylinder bed machine. It is a compound needle feed machine. Can someone identify the model # of this machine? Sadly I assumed that Consew could look up the model number using the serial #. After calling corporate today I was told that they cannot. What? It has an oil reservoir on the top front which you can see in the photo below. The table top is solid with no oil pan or hole in it under the machine. Also does anyone have a Stitch length position plate for this machine? Thanks in Advance, Garric Quote Share this post Link to post Share on other sites
Northmount Report post Posted October 17, 2022 @CitroenLVR Moved your post to Leather Sewing Machines. Much more likely to get help here! Quote Share this post Link to post Share on other sites
kgg Report post Posted October 17, 2022 12 minutes ago, CitroenLVR said: Can someone identify the model # of this machine? To me it looks like a Consew 287R. kgg Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted October 18, 2022 yep. Consew 287 Narrow cylinder arm would be 277. glenn Quote Share this post Link to post Share on other sites
CitroenLVR Report post Posted October 18, 2022 Thanks to all who chimed in. Yes, I thought it might be a 287 but I thought a 287 was a triple feed machine? So would this be a 287RB-1? Many Thanks All! Quote Share this post Link to post Share on other sites
AlainaZ Report post Posted October 19, 2022 On 10/17/2022 at 4:13 PM, CitroenLVR said: Sadly I assumed that Consew could look up the model number using the serial #. After calling corporate today I was told that they cannot. What? Someone at Juki told me (if I remember correctly) that some decades back Consew was sold and now it's just a shell of what it once was. Maybe records got discarded? Based on my experience trying to get parts from them, they seem to have little interest in helping their customers. Quote Share this post Link to post Share on other sites
CitroenLVR Report post Posted October 19, 2022 I believe your correct AlainaZ! I sent Consew corporate an email Saturday with the serial number and photos. No response. Before we bought the Consew we owned an older Pfaff. I contacted Pfaff and heard back the next day. I'm not sure which model I have but the bobbin on the 287 spec sheet is way too large for the machine. Thanks all for the input! Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted October 20, 2022 call Bob Kovar at Toledo Sewing. He sells Consew and may be able to help you. glenn Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted October 20, 2022 On 10/18/2022 at 1:54 PM, CitroenLVR said: Thanks to all who chimed in. Yes, I thought it might be a 287 but I thought a 287 was a triple feed machine? So would this be a 287RB-1? Many Thanks All! You didn't post the bobbin size,but if it's a large bobbin it would be a 287RB the B stand for large bobbin,the older 287's with a small bobbin & reverse were 287R.This looks like triple feed to me. Quote Share this post Link to post Share on other sites