CFM Frodo Posted December 12, 2022 CFM Report Posted December 12, 2022 I thought this might help others 1 1/4” (6.35 mm) Brass nut lead the nut can be easily found on any old faucet I use this as a small anvil to set rivets or snaps in tight spots. It can be laid flat or stood on its edge Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Members Klara Posted December 12, 2022 Members Report Posted December 12, 2022 Do I understand correctly that you have poured molten lead into the nut? I like the idea (got the lead when I had new tyres mounted and balanced), but what did you use as bottom to the nut so the lead would not leak out? Quote
CFM chuck123wapati Posted December 12, 2022 CFM Report Posted December 12, 2022 very cool idea!!!!!! Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted December 12, 2022 Author CFM Report Posted December 12, 2022 2 hours ago, Klara said: Do I understand correctly that you have poured molten lead into the nut? I like the idea (got the lead when I had new tyres mounted and balanced), but what did you use as bottom to the nut so the lead would not leak out? Set the nut on the ground Hump a little dirt around it any excess file in off with your file Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
CFM Frodo Posted December 12, 2022 Author CFM Report Posted December 12, 2022 I used it this morning to install a snap Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Contributing Member fredk Posted December 12, 2022 Contributing Member Report Posted December 12, 2022 Clever idea A few of these in different sizes could be handy Quote Al speling misteaks aer all mi own werk..
Members Handstitched Posted December 13, 2022 Members Report Posted December 13, 2022 Thats a great idea. Theres often times when my regular anvils just don't work . I have a ....thingy? not sure what its called actually , but I think it was used a by a smithy that I use. It has a square post that fits into a full size smithy anvil ? Old shoe lasts are handy too. 8 hours ago, Frodo said: I used it this morning to install a snap Is that for a loader for a hand gun ? HS Quote ' I have a very gweat friend in Wome called Biggus Dickus, He has a wife you know, do you know whats she's called? Incontinentia.......Incontinentia Buttocks '
Members Hags Posted December 13, 2022 Members Report Posted December 13, 2022 Great idea! I have a piece of round stock, 1.5 inch x 2 that I use for much the same purpose. Quote Not so retired RN. Living on the Washington Peninsula.
CFM Frodo Posted December 13, 2022 Author CFM Report Posted December 13, 2022 2 hours ago, Handstitched said: Thats a great idea. Theres often times when my regular anvils just don't work . I have a ....thingy? not sure what its called actually , but I think it was used a by a smithy that I use. It has a square post that fits into a full size smithy anvil ? Old shoe lasts are handy too. Is that for a loader for a hand gun ? HS Yes. A speed loader, this is an addition to a guys shoulder holster Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.