CFM Frodo Posted January 20, 2023 CFM Report Posted January 20, 2023 The machines are designed to sew a max 3” line in order to patch a shoe, Ot was not designed to sew a purse or to make a leather vest. In all honesty, It was the best $120.0 I ever spent. Not on sewing leather but the education I received on how a machine works how a bobbin works was well worth more than I paid little advice for Chi chi patcher owners use your chisels to punch your holes adjust your stitch length to match your chisel ide the patcher to see through the pre-punched holes Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
kgg Posted January 20, 2023 Report Posted January 20, 2023 1 hour ago, Frodo said: Not on sewing leather but the education I received on how a machine works how a bobbin works was well worth more than I paid Great education machine. 1 hour ago, Frodo said: little advice for Chi chi patcher owners use your chisels to punch your holes adjust your stitch length to match your chisel ide the patcher to see through the pre-punched holes Doesn't this defeat the purpose of using a machine if you are going to pre-punch the stitching holes? kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
CFM chuck123wapati Posted January 20, 2023 CFM Report Posted January 20, 2023 2 hours ago, Frodo said: The machines are designed to sew a max 3” line in order to patch a shoe, Ot was not designed to sew a purse or to make a leather vest. In all honesty, It was the best $120.0 I ever spent. Not on sewing leather but the education I received on how a machine works how a bobbin works was well worth more than I paid little advice for Chi chi patcher owners use your chisels to punch your holes adjust your stitch length to match your chisel ide the patcher to see through the pre-punched holes that is a good idea indeed, there are always work arounds to problems and this is one of them. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted January 20, 2023 CFM Report Posted January 20, 2023 32 minutes ago, kgg said: Great education machine. Doesn't this defeat the purpose of using a machine if you are going to pre-punch the stitching holes? kgg LOL they should come with a diploma, signed by Rube Goldberg. Using chisels to pre-punch so you don't have to use a hand awl to do the work while hand sewing wouldn't be any different would it? The way i understand the definition of machines or tools is that they need to do the job faster and easier than without the tool while still giving equal or even better results. In this case , my parameters, faster and easier than hand sewing with equal results of any other machine doing the same chore. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
kgg Posted January 20, 2023 Report Posted January 20, 2023 1 hour ago, chuck123wapati said: they should come with a diploma, signed by Rube Goldberg. From the Purdue University kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Members TonyV Posted January 21, 2023 Members Report Posted January 21, 2023 On 1/17/2023 at 10:16 AM, chuck123wapati said: here is my first try aside form the turkey tracks what do you think? the thread looks small for the hole but i haven't pounded it down. I used a shmetz 110/18 leather needle with tex 90 thread. That's much better stitching than any I've done on my machine. Almost makes me want to try to practice with it more, maybe get some decent work out of it. Quote
CFM chuck123wapati Posted January 21, 2023 CFM Report Posted January 21, 2023 1 hour ago, TonyV said: That's much better stitching than any I've done on my machine. Almost makes me want to try to practice with it more, maybe get some decent work out of it. it does pretty darn well with this thread needle combo. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted January 22, 2023 CFM Report Posted January 22, 2023 I made another adjustment i was having problems with heavier thread breaking or skipping stitches, one thing i found was the needle scarf was about 1mm or maybe 2 away from the shuttle hook. I loosened up the arm and was able to get it adjusted to within maybe a .5 mm which helped considerably, it doesnt break the thread now but i still need heavier needles which are a few days out. I also filed on the foot teeth some more cleaning them up with a file to the point now they don't tear the hide, almost unnoticeable before finishing lol. A test piece i did this morning, with the tex90 and Schmetz 18 needle. it is 2 pieces total 1/4" thick each pass is about 5" long so about 30" of continuous stitching without a hiccup. I feel i could easily run this machine till the bobbin ran dry. After looking at the Schmetz needle it is chisel shaped giving an angled slot, the shaft opens up the slot nicely to get the thread through and final finishing closes them up just like hand sewing. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted January 22, 2023 CFM Report Posted January 22, 2023 On 1/19/2023 at 6:10 AM, Frodo said: i need that stamp Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted January 22, 2023 CFM Report Posted January 22, 2023 On 1/20/2023 at 10:50 AM, kgg said: From the Purdue University kgg i found a book !!! lol you gotta check this out sewing machines to teach physics.https://ia800802.us.archive.org/34/items/mechanicsofsewin00sing/mechanicsofsewin00sing.pdf Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted January 22, 2023 CFM Report Posted January 22, 2023 1 hour ago, chuck123wapati said: i need that stamp Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
Members billybopp Posted January 23, 2023 Members Report Posted January 23, 2023 13 hours ago, Frodo said: Only problem with that stamp is that it's upside down! - Bill Quote
kgg Posted January 23, 2023 Report Posted January 23, 2023 17 hours ago, chuck123wapati said: i found a book !!! lol you gotta check this out sewing machines to teach physics.https://ia800802.us.archive.org/34/items/mechanicsofsewin00sing/mechanicsofsewin00sing.pdf Thank you. I downloaded it and had a brief look. I will give it a read later today but it looks like some nice info there. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
DonInReno Posted January 23, 2023 Report Posted January 23, 2023 (edited) Here’s a video I hadnt seen before with some upgrades: If someone new to these hasn’t seen it, this is probably the most extensive custom build I’ve seen: Edited January 23, 2023 by DonInReno Quote
CFM chuck123wapati Posted February 10, 2023 CFM Report Posted February 10, 2023 On 1/23/2023 at 10:47 AM, DonInReno said: Here’s a video I hadnt seen before with some upgrades: If someone new to these hasn’t seen it, this is probably the most extensive custom build I’ve seen: with that machine shop he could build his own lol. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted February 10, 2023 CFM Report Posted February 10, 2023 sew heres my take on this 100 dollar piece of crap after a month( mostly awaiting on needles) I'm done tinkering, with the exception of building a nice bobbin stand and a bobbin winder. i changed to a system 135x16 needles which took only about ten minutes work. it will run t135 thread with 140 /22 or 130/21 needles flawlessly on leather under 3/8" thick. That's its max thread and needle and thickness IMO that it will sew reliably without pre punching holes or any other work arounds. I will use it with that needle thread combo or t90 and size 18 or 19 needles until its little wheels fall off and love every minute of it. Thanks to everyone who responded to me each of you helped me understand this machine, thread & needle combos and above all gave me the inspiration to try it out. My scrap pile is much smaller now lol. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Doc Reaper Posted February 10, 2023 Report Posted February 10, 2023 I almost purchased that patch machine but went with the cobra instead. I don’t have access to the machines or the time to invest in making a cheap machine better. If I did have a machine shop I’d give myself all the cool things I want Quote Doc Reaper
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.