Leather Laser Project Work in Progress

[ArkieNewbie]

I finished this project up last night. This is hand stitched and it was a pain! But I am very please with how it turned out!

[Bert03241]

I really hope you got the orientation right. If it was me I'd want the sign facing forward.

[ArkieNewbie]

On 4/14/2023 at 6:54 PM, Bert03241 said:

I really hope you got the orientation right. If it was me I'd want the sign facing forward.

Yes sir! I double and triple checked with the customer. This "runner" will be hanging off the front of the table not running the whole length of the table. 

It took a little conversation to understand what they were wanting. 

[Rwest]

On 4/10/2023 at 7:35 PM, Hags said:

Very nice! On my list of want to have! 

Same here..

[hotleatherworlds]

On 4/10/2023 at 9:24 PM, ArkieNewbie said:

I started a project last night for a young lady who will be selling vegetables at our local farmers market. I designed this logo for her.

It is laser engraved on a 16"x16" piece of 2/3oz. vegtan. I will be stitching it onto a 24"x60" piece of dark brown oil tan for her to put on her display table. I'm thinking about using yellow or bright blue for the stitching to give it a nice pop of color. 

It looks good. 

[ArkieNewbie]

19 hours ago, hotleatherworlds said:

It looks good. 

Thanks!

[ArkieNewbie]

On 4/21/2023 at 2:05 PM, Rwest said:

Same here..

 

On 4/10/2023 at 7:35 PM, Hags said:

Very nice! On my list of want to have! 

Diode lasers are pretty attainable as far as price goes and mine works great for engraving on leather. This is the largest piece I've done and it took about 35 minutes. 

The laser I have is about $280, it's a 5.5W laser with a 16"x16" bed.

I would not recommend a diode laser if you're looking for something to cut out patterns with. For that I would go the CO2 route. For me to cut 3/4oz leather takes about 15 passes. That could definitely be reduced with a more powerful diode laser but over all CO2 is going to be better for cutting. 

[jrdunn]

On 4/21/2023 at 2:05 PM, Rwest said:

Same here..

I don't know where you are in Oklahoma but the Norman Public Library has a CO2 laser you can use for free if you have a library card.  My son uses it to engrave some wood and leather things.  I have been considering trying my hand at but don't know what I would have to do to get a card since I don't live in or near Norman.  I think other library systems may have them but know that my local doesn't.  JM2C.  Jim

[Tugadude]

10 minutes ago, jrdunn said:

I don't know where you are in Oklahoma but the Norman Public Library has a CO2 laser you can use for free if you have a library card.  My son uses it to engrave some wood and leather things.  I have been considering trying my hand at but don't know what I would have to do to get a card since I don't live in or near Norman.  I think other library systems may have them but know that my local doesn't.  JM2C.  Jim

That is something that people need to look into if they don't wish to purchase one themselves, or if they want to get some experience before jumping in and buying one.  My sister used one at a city-sponsored facility to make some gorgeous wood projects.  Sadly the money ran out and it shut down.  But there might be more places like it.  Worth pursuing in my opinion.

[ArkieNewbie]

26 minutes ago, Tugadude said:

That is something that people need to look into if they don't wish to purchase one themselves, or if they want to get some experience before jumping in and buying one.  My sister used one at a city-sponsored facility to make some gorgeous wood projects.  Sadly the money ran out and it shut down.  But there might be more places like it.  Worth pursuing in my opinion.

A local university, Arkansas State, has something like this. I think they call it the Entrepreneur Collective. They have 3D printers, a laser, and other equipment for people to use. I wish they would buy an industrial sewing machine haha.