Roger Posted February 18, 2008 Report Posted February 18, 2008 this is the first of three winged seats i have coming up. this one has a matching tool bag. Quote
Members Spider Posted February 18, 2008 Members Report Posted February 18, 2008 Man Beeza, this is a tight and comfy lookin seat. Very nice work on it. What bike is it going on? Quote
David Posted February 18, 2008 Report Posted February 18, 2008 Very nice beeze, great color. Dave Quote
Members bustedlifter Posted February 18, 2008 Members Report Posted February 18, 2008 Nice tooling. Nice bag,too, is there something in it to help it keep it's shape? Quote
Contributing Member rdb Posted February 18, 2008 Contributing Member Report Posted February 18, 2008 nice featherwork! another beauty... Quote
Roger Posted February 18, 2008 Author Report Posted February 18, 2008 Man Beeza, this is a tight and comfy lookin seat. Very nice work on it. What bike is it going on? Thanks Spider! This is a recovered LePera Saddle for a HD soft tail Nice tooling. Nice bag,too, is there something in it to help it keep it's shape? Thanks! with the lining the bag is 12-14oz. i started using lexan to stiffen the bag through the mounting area across the back and a strip across the front in the area of the snaps. Thanks to all for the comments! Talked them out of a completetly black seat again Quote
TomSwede Posted February 18, 2008 Report Posted February 18, 2008 One beautiful seat that is and nice matching with the bag too. Nice detail on the feathers! I especially like the way it's shaped, it's so nicely sculpted around the insides. I'm wondering about how the sides are attached behind/under the seat? Any chance of a pic from there aswell? While I'm at it I also like to ask how you create the patterns from wich to cut out the leather? To grease you up for some answer I'd like to say that this one has the same smooth feeling I like to admire over at Xians gallery! Nice job Beeza! Tom Quote
Roger Posted February 19, 2008 Author Report Posted February 19, 2008 One beautiful seat that is and nice matching with the bag too.Nice detail on the feathers! I especially like the way it's shaped, it's so nicely sculpted around the insides. I'm wondering about how the sides are attached behind/under the seat? Any chance of a pic from there aswell? While I'm at it I also like to ask how you create the patterns from wich to cut out the leather? To grease you up for some answer I'd like to say that this one has the same smooth feeling I like to admire over at Xians gallery! Nice job Beeza! Tom thanks tom!! i make a pattern for each seat i make and i just go by what looks good to me. this type of seat is a bit of a challenge to get the cover tight around the sides on the back area of the seat..takes lots of pulling! since you asked soooo nice(i had everything wraped and boxed) i pulled the seat back out and took a couple pics. the bottom is covered but, it is smooth around the bottom and pop riveted in place. Quote
ETW Grumpy Posted February 19, 2008 Report Posted February 19, 2008 Nice detail Rog. Good looking work. Quote
TomSwede Posted February 19, 2008 Report Posted February 19, 2008 Thank you very much, I bow my head to thee! Just as I thought with the sides, alot of pulling. You sure are good at this. If I have time I'll pop in to a friend and pick a seat up today. Haven't seen it yet but it's not a regular shaped solo seat and tha'ts why I asked. Probably something this way from what I hear, makes me a little nervous. Also have probs finding a nice finish/top coat here in Sweden. Last but not least I have to turn some rocks to find some good padding to work with but that shouldn't be to hard. First handed I'll have to work with the fishing rod tubes I have scheduled with some really long hours of mexican basket weave lacing, have this laying on the side and do some on and off work with it. Try to get done before May. It's amazing how good you got that worked so smooth around the edges, sculpted is the only word I can find for it. Top notch work, Beeza! Once again, many thanks for your kind help. It will definetly be useful once I get going down that rocky road of making that seat! Tom Quote
Roger Posted February 20, 2008 Author Report Posted February 20, 2008 let me know if i can answer any other questions. my methode does require lots of pulling and some times i need to let it set, wet it again and remove the rivets and go at it a second time in certain areas. top coat... i try to only seal my seats with pecards... a couple coats make a seat water proof. you can order it right from thier web site Quote
TomSwede Posted February 20, 2008 Report Posted February 20, 2008 (edited) Well since you proven to be such a nice gentleman I'll shoot off another round of quickies for ya'! Was just wondering about the thickness of the pulled leather pieces and about Pecards (unavailable in Sweden), if it seals the leather properly (for example, hold black from crocking)? Best regards Tom Edited February 20, 2008 by TomSwede Quote
Roger Posted February 22, 2008 Author Report Posted February 22, 2008 Well since you proven to be such a nice gentleman I'll shoot off another round of quickies for ya'!Was just wondering about the thickness of the pulled leather pieces and about Pecards (unavailable in Sweden), if it seals the leather properly (for example, hold black from crocking)? Best regards Tom i use 3-4 oz leather for the side of the seat and it is one piece. pecard's is similar to aussie conditioner. hd sells pecards in under thier own brand if you can get it. it is a water proofer/conditioner and it's all i use anymore. i have had not problems using it over any dyes Quote
TomSwede Posted February 22, 2008 Report Posted February 22, 2008 That is something worth checking out, I'll be knockin' the door of HD Sweden first thing on monday asking for their conditioner! Also I have to tap my supplier in the head for some Aussie balm. They shook their head when I asked for it and replied they only carry Tandys stuff, well guess what I find on Tandys site. You're the best! Tom Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.