Do you have a Makers Mark?

[Johanna]

This logo belongs to SteveB Leatherworks and I like it. Would make a great tattoo.

Got to thinking about logos with Candyleather's custom stamps, and the one we had made years ago for Artifax, our leather business. Little Jon would hide a "JA" in a carving if he especially liked the work. John Henry stamped a maker stamp in every piece he did. How do you sign your work? Post a pic of your mark, if you have one.

Johanna

[abn]

Johanna, great topic.

I really struggled with the idea of creating a maker's mark. And Infinity's web site didn't make things any easier. They have all kinds of examples of unique maker stamps (check out these samples) and the classic saddler's stamp (more samples).

I debated the choices: using last name only... Or a web address... Or some sort of brand name... Or a custom logo...

In the end, I decided to go with something very understated and simple: my initials in 1/8" tall text. My avatar is a close-up of this mark. (I also attach an example of how it looks on a project.) I've been using it for a while and like it. It works well in small spaces, and gives just a hint of who made the item (for those of us who are a bit bashful ).

I definitely look forward to seeing what other folks post.

-Alex

[ClayB]

I agree with Alex. Deciding on how to mark you work can be a difficult decision. Heck, it still surprises me that people insist that I sign my work. When I started looking at makers stamps, I wanted it quite small. I didn't want it to look like a blaring advertisement. I ended up buying a delrin (plastic) maker stamp and they work really well, make a good impression and are reasonalby priced. I have used this stamp on a few saddles, but I don't care for it on much else. I usually just carve in ClayB with my swivel knife. That way it is marked in a more subtle way. Seems like that is the way several of the people that I have been learning from do it.

[wolvenstien]

I only started marking my work recently, and forget to do it most times.... Here is a picture of a clutch purse I made for my sister and I remembered to mark it.

Close Up of my mark

[fleabitpokey]

Johanna, this is something I hadn't thought about. Where would one put their stamp on a pair of chaps?

Alex, great link for stamps, thanks for sharing. I like the choices that are available. Especially the stamps that are 1" and 2" set.

Stephanie

[BruceGibson]

If this works, here's mine...

http://www.gibsonprorodeo.com/GIBSON--MAKE...2013%202005.jpg

[Regis]

This has me thinking a lot about the whole concept of maker marks. I always signed (hand engraved) gold & silver jewelry with my first name only. I thought the stamps on jewelry looked too much like "factory" and not custom. But, the leather stamps I see here seem to allow for a lot more personalization. Simply because there is a lot more room to work, even if hidden in corner of design. It will probably will be some time before I qualify to make something for "outside the famly" but, for the 1st time, I'm considering a stamp.

If you use a stamp, do you have more than one size? If you made a belt and chaps, would you stamp both with the same size?

"Inquiring (or wandering) minds want too know" [LOL]

Regis

[Blake]

This has me thinking a lot about the whole concept of maker marks. I always signed (hand engraved) gold & silver jewelry with my first name only. I thought the stamps on jewelry looked too much like "factory" and not custom. But, the leather stamps I see here seem to allow for a lot more personalization. Simply because there is a lot more room to work, even if hidden in corner of design. It will probably will be some time before I qualify to make something for "outside the famly" but, for the 1st time, I'm considering a stamp.

If you use a stamp, do you have more than one size? If you made a belt and chaps, would you stamp both with the same size?

"Inquiring (or wandering) minds want too know" [LOL]

Regis

Hello Regis

I think it is fairly common practice to have a stamp of some kind to identify your work.

I think it shows pride in your craftsmanship and it also identifies it as made by YOU and not a copy or a knockoff. Many people buy handmade leather goods because they are unique and one of a kind or custom just for them. That almost can become meaningless without a makers stamp or mark.

I have several stamps that I use. One is my saddle makers stamp that gives my name and location. I also have one that I use to mark books, spur straps chaps etc. It only says Blake Kral "Cowographer". I also had one before I sold my retail business and tried to retire that simply said Blake Kral Saddle Co.. That only showed that it was made by my company but not by me personally.

Over the years I have had the pleasure of trading work with other craftsman and some of that work has become highly collectable but would not be without a makers mark.

If you are considering buying one , A Delrin stamp would be a good starter and reasonably priced. After you use it awhile you may want to change it and that won't be as costly as a steel stamp.

Of course there are exceptions. I reguested a Makers Stamp impression from a top Saddle Maker a few years back and he politely told me that he has never had one. That got me really looking at his saddles and they are all signed with a swivel knife and just plain old steel number and letter stamps that are used to mark steel. On the other hand his work in itself is his signature and extremely hard to duplicate.

I can post a couple of pictures of my stamps if you are interested.

Just my $.02 worth and you can keep the change.

Kind Regards

Blake

[abn]

I reguested a Makers Stamp impression from a top Saddle Maker a few years back and he politely told me that he has never had one. That got me really looking at his saddles and they are all signed with a swivel knife and just plain old steel number and letter stamps that are used to mark steel. On the other hand his work in itself is his signature and extremely hard to duplicate.

You know, not too long ago, I read that many of the pioneering Native American potters didn't sign their work, either. I think they felt it was some sort of a vanity, and that the unique styles and distinctions of their work would be the most proper way to identify the maker.

I don't necessarily agree (and most modern potters are now signing their work), but it's an interesting point of view. Stylistically, couldn't we all identify a BMW, even if it didn't have a nameplate? Or an Randall knife? Or a Chihuly vase?

I suppose I'm just talking about the "holy grail" of leatherwork -- when someone knows it's your piece just from the workmanship and style.

[K-Man]

I have a couple of different ones, and it depends on what I'm making as to which one I use. This is the one that goes on the holsters:

I have it in two different sizes - 1" and 1.5"