Adler 220 Needle for Leather

[Ritsch222]

Hello Guys,

im looking for leather Needles for my Adler 220, 7x23 needle System,

i found out that 328 Needles have very close specs (length, end to eye).

Did any one try this, or is there adjustment on the machine necessary?

 

Thanks!

Edited Monday at 04:32 PM by Northmount
fixed typo in the title

[Northmount]

54 minutes ago, Ritsch222 said:

im looking for leather Needles for my Adler 220, 7x23 needle System,

i found out that 328 Needles have very close specs (length, end to eye).

Did any one try this, or is there adjustment on the machine necessary?

I moved your post to leather sewing machines.  This is where the machine guys hang out so you are more likely to find answers here.

[CowboyBob]

Yes,same length.

[Constabulary]

7x23 are slightly longer IIRC. Minor needle bar height adjustment could be necessary but they may work even w/o adjustment.

[Michiel]

I have an Adler 220 on which I use 328 needles.

I have adjusted/redone the timing.

Sometimes I measure the difference in length between the needle systems and adjust the needle bar using a caliper.

[Ritsch222]

Is it enough to lower the needle bar 1mm or ist there more adjusment necessary if i do this?

 

an thanks for the Answers!

[Constabulary]

basically that's it but I would check the needle hook timing too - that never can be wrong.