David Posted February 2, 2009 Report Posted February 2, 2009 I must have done a hundred of these over the last several years, but this one I did after glassing the leather. I wanted to see if it gave better depth and definition as I had been told. Without a doubt the glassing tool works. The surface is smoother and the tooling deeper. If you don't have a glassing tool, contact Barry King. David Theobald Quote
AndyL1 Posted February 2, 2009 Report Posted February 2, 2009 I must have done a hundred of these over the last several years, but this one I did after glassing the leather. I wanted to see if it gave better depth and definition as I had been told.Without a doubt the glassing tool works. The surface is smoother and the tooling deeper. If you don't have a glassing tool, contact Barry King. David Theobald Killer seat. I have a noob question for you... How do you get such a nice fade in the leather stain. It goes from light in the center to a deeper shade of tan/brown on the edges. Airbrush? -Andy Quote Blackthorn Leather on Etsy • Blackthorn Leather on Facebook
Moderator Johanna Posted February 2, 2009 Moderator Report Posted February 2, 2009 David, your seats are each a work of art. Glad to see this one isn't black! Nice. Quote You cannot depend on your eyes when your imagination is out of focus. - Mark Twain
Contributing Member Crystal Posted February 2, 2009 Contributing Member Report Posted February 2, 2009 Have you noticed any difference in the dye or finish since using the glassing tool? Nice work, as usual. Crystal Quote Black Dog Custom Leather
Members kiwidownunder Posted February 2, 2009 Members Report Posted February 2, 2009 Fantastic seat. The skull is great. kiwi Quote KIWIDOWNUNDER May you be blessed with miracles with every breathe that you take. www.kiwidonunderleather.com
Members BradB Posted February 2, 2009 Members Report Posted February 2, 2009 Wow that does look smooth!! Quote
Members Greybeard Posted February 2, 2009 Members Report Posted February 2, 2009 Another seat from the Master! Quote Never Stop Learning..... https://www.facebook.com/Greybeardtc/ https://www.facebook.com/The-Art-of-Being-Me-Richard-Lane-617168155076456/
David Posted February 2, 2009 Author Report Posted February 2, 2009 Andy, I have an ancient Paasche double action airbrush, and an even older Miller compressor. They get the job done. Dave Johanna, Thanks, I am also glad it isn't black. By the way this is the seat with 99 on top and 100 on the bottom. Glad I have a wife who sews. Her suggestion just skip a hole on the bottom somewhere near the front where they are closer together. Worked like a charm. Dave Crystal, Absolutely no difference in the dye or antiquing. Dave Quote
Members TroyS Posted February 3, 2009 Members Report Posted February 3, 2009 Dave, the seat is fantastic as always ... I'm glad this one isn't black... I'm really digging the swivel knife bird.... Quote Troy
Members CitizenKate Posted February 3, 2009 Members Report Posted February 3, 2009 Oooooo! I don't remember seeing the finger cuts on the bottom on your previous projects... is that something new or have I just not been paying attention? Either way, beautiful work, as always! Kate Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.