Members Constabulary Posted September 15, 2015 Members Report Posted September 15, 2015 5 SPI is the max. stitch length the 29K and 30 have when new. Test the stitch length on a thin piece of card board. A good score for a used patcher is 5.5 - 6 SPI but when is it shorter I (personally) would bot buy the Adler due to the spare parts situation (or you can live with shorter stitches). For the 29K you may find the parts but have to find out which are worn but you at least can find any 29K71 part for reasonable prices. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Contributing Member Ferg Posted September 15, 2015 Contributing Member Report Posted September 15, 2015 I have a 29-4. Very good condition. I done a few things during refurbishing but essentially it was good. I can get 7 spi in thin leather, it will do 5 spi all day long in a quarter inch. The 29-4 leaves presser foot marks in veg tan and any soft leather. You can release the pressure but doing so is questionable because that is half of what enables the material to be fed under the foot. I haven't used mine very much, just haven't had the projects that required it. ferg Quote
Members GreenwoodBowcraft Posted March 21, 2016 Members Report Posted March 21, 2016 Thanks for the information here! I have a couple of additional questions. I've been needing a leather machine in order to grow my business and capability some. My father in law has an old singer machine which I believe to be a 29-4. It came from his father's shoe repair business where they had a handful of different machines. When you say "not for production" what do you mean exactly? Assuming it's in well working order, would it not stand up to the wear of half a dozen belts a week, or would it simply be more difficult than with machine designed for that purpose? I'd love a cobra, or even a tippman but even though my business does well, I can't justify that kind of investment as most of our proceeds to back towards supporting the family. I'm looking mainly for some clam-shell type quivers, and sewing patches onto arm guards, and perhaps some belts. I'm looking at maybe 5-10 projects a week on the high end. I think I can work inside the .25" max thickness but I don't want to waste my time and damage a piece of family history for no reason. Thanks for your contributions! Quote
Moderator Wizcrafts Posted March 21, 2016 Moderator Report Posted March 21, 2016 Thanks for the information here! I have a couple of additional questions. I've been needing a leather machine in order to grow my business and capability some. My father in law has an old singer machine which I believe to be a 29-4. It came from his father's shoe repair business where they had a handful of different machines. When you say "not for production" what do you mean exactly? Assuming it's in well working order, would it not stand up to the wear of half a dozen belts a week, or would it simply be more difficult than with machine designed for that purpose? I'd love a cobra, or even a tippman but even though my business does well, I can't justify that kind of investment as most of our proceeds to back towards supporting the family. I'm looking mainly for some clam-shell type quivers, and sewing patches onto arm guards, and perhaps some belts. I'm looking at maybe 5-10 projects a week on the high end. I think I can work inside the .25" max thickness but I don't want to waste my time and damage a piece of family history for no reason. Thanks for your contributions! The 29-4 is century old now. If it was used normally in a shoe repair shop, it will probably have an awful lot of worn out parts. You won't know until you try it or buy it. The worse case is that it will only give 8 to 10 stitches per inch. That's horrible in leather sewing. Even worse than that would be so much slop in the driving pinion that it won't even pick off the thread loop and sew. Parts for the driving system are dear and not necessarily compatible with modern aftermarket parts. As for the 1/4 inch capacity, most patchers can manage that. There is a sliding block on the leaf spring on the back that controls the foot lift during operation. You will be limited to #92 bonded nylon thread. Even if the machine is pristine and sews its rated 5 to the inch, the dime size bobbins don't hold very much thread. You can probably sew up to 10 mens' belts per load, if you stick to #69 bonded thread in the bobbin. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Moderator Wizcrafts Posted March 21, 2016 Moderator Report Posted March 21, 2016 (edited) I forgot to mention that these machines are meant for shoe and boot uppers sewing. Nowadays, most of us use them to repair ladies' purses and sew patches onto bikers' vests, mainly over pockets. There are no edge guides to ensure a straight stitch line. The feed is via teeth on the single presser foot. The 29-4 is the polar opposite of a production machine. It is a patcher and repairs machine only. Edited March 21, 2016 by Wizcrafts Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members ke6cvh Posted July 12, 2019 Members Report Posted July 12, 2019 Hello group, I hesitated for a really long time to buy a patcher because all the negative comments I read. Now I have 4 on hand in a month's time and considering buying an antique Bradbury A1. A couple of things I've noted. I bought a "2972b" China clone which seems to be the same as a Techsew 2900 costing much more. I bought on Amazon for 899 because they delivered to my overseas location but it shipped from USA. There was a washer missing on the hand wheel but we fabricated that easy enough allowing proper dis engagement of it for bobbin winding (it would over tighten and be next to impossible to release without the washer). The different sized needle holes are actually the same size on the plate of this machine but again no big deal as I can change that. It sews like a dream and it is as close a copy as they could make with interchangeable parts generic available on internet. So then I bought the tiny low cost China patcher. They are starting to go up in quality. The bearing on it is a modern sealed bearing. Many of the parts are chromed. It has an honest 1/2 inch lift and can do that 5-6 spi at 1/2 inch thickness going through 16 layers of medium weight denim exactly 0.5 inch. It cost me 177 off Amazon. Not all are equal. So then I bought two patchers from Robin industries out of China. 165 for their four different models before shipping. Here in Philippines I paid 75 Fedex, 12 US dollars tax, 25 bank wire fee from US bank. The first was an RC32-3A. It takes a system 7x3 needle up to size nm250. I sewed v346 right out of the box and haven't tried anything thicker yet. The bobbin on this machine is giant compared to the larger of the two Singer bobbins on a 29k72. It has a built in roller guide (but there are youtube videos on how to make a sliding and simple cloth guide that clamps onto the wings rotating the universal feed). The next one is a Robin RC32-2A post bed. It had a minor issue going above v138 thread that I fixed with a little work in 1 hour and now goes up to nm250 as well but this machine takes a Singer 45k1 needle (dd214). So now to my comments on production work. That is an interesting statement to make. We have 5 dozen industrials. We try to keep pairs or more of every type. In a factory one thing is for certain there will be machines dedicated to each portion of a stitch operation in the assembly process. Do I believe these machines could be used for production purposes? Absolutely! If used in a certain stitch operation that others cannot perform which will limit them in use but at the same time allow them to do a tiny procedure others cannot perform. The bulk would be done on flat beds and cylinder arms and the tiny little portions that only they can perform would be on one of these. A classic example is my circa 1917 Singer glove stitching machine that is a post bed and a chain stitch.....I'd never use it for almost anything but then again if I was to sew fingers on light leather gloves why not? Doesn't look like an industrial and is much smaller than most domestics but it still is/was a production machine. We are currently making mad tables for all these and we will post them as they are completed. Yes, these patchers don't touch a candle to the Cowboy cb4500 Bob Kovar sold me but then again there are times they can do things the Cowboy can't do (production or non production). Best regards, Mike Quote
Moderator Wizcrafts Posted July 12, 2019 Moderator Report Posted July 12, 2019 I should have qualified my previous statement from 2016 where I claimed that Singer patchers are the polar opposite of production machines. This would apply where it is the only sewing machine a user has and will have to perform all of the sewing operations. They can be applied to production situations, as described by Mike, where other machines struggle and they excel. But, the patcher should be finely tuned and high quality if you depend on it to help produce goods for sale. Most discussions about Singer patchers are from people considering buying a 29-4 as their first or second sewing machine. They want to know if the machine can sew belts, straps, holsters, saddles, etc. They ask how thick can it sew and what is the thickest thread it can use. This is because the machines are so well built that they appear to be strong enough to handle all those jobs. The answers tend to disappoint the posters. To the point of the original discussion, Singer 29-4 patchers are from the early 1900s and are usually shot by this time. Their stitch length is the first thing to go, then the timing gears wear out. Some of those gears are no longer available, except from salvage machines. I personally would not trust such a machine in a production environment unless it was rebuilt to factory specs (including possibly making some new pinion gears).. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Gunnarsson Posted July 14, 2019 Members Report Posted July 14, 2019 On 7/12/2019 at 5:53 PM, Wizcrafts said: ...then the timing gears wear out. Some of those gears are no longer available, except from salvage machines... Are you referring to the gears under the bobbin area only, or something located "earlier" in the timing mechanism? (I'm not familiar with how the "earlier" part of the mechanism is made.) Quote
Moderator Wizcrafts Posted July 14, 2019 Moderator Report Posted July 14, 2019 7 hours ago, Gunnarsson said: Are you referring to the gears under the bobbin area only, or something located "earlier" in the timing mechanism? (I'm not familiar with how the "earlier" part of the mechanism is made.) I was referring to the pinion gears under the nose of the arm. Those have changed dimensions and how many were used over the years. People trying to restore ancient model 29-4 machines are discovering that there aren't any readily available replacement pinions in the aftermarket. There are other moving parts that fit the early models but not later ones. It is a crap shoot to buy an ancient patcher. However, they make excellent weights and anchors! Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Gunnarsson Posted July 14, 2019 Members Report Posted July 14, 2019 All right, thanks! I'm keeping an eye out for a cheap(!) 29 and would be happy with an early one as long as it's complete, but I'm expecting to have to make some new or refurbish worn out parts myself. Not in the mood for buying new replacements just to find out they're (chinese?) low quality parts that don't fit well and need modification, might as well refurbish worn parts or make my own from scratch then. Trying to do the research first so I know what to look for on a machine when I find it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.