Members Jarrett V Posted July 23, 2012 Members Report Posted July 23, 2012 I haven't been on in a while, and i decided that I should post up a new belt for everyone to critique. This belt consists of two layers of 6-7 oz. Herman Oak, tooled on the top and finger carved on the inside. I used #138 thread at around 11 spi. Quote
LNLeather Posted July 23, 2012 Report Posted July 23, 2012 Wow, Verrrrry Nice! I really like the way you even tooled the keeper... Quote ~Cheryl There are many things in life that will catch your eye, but only a few will catch your heart... pursue those...
Contributing Member Bob Blea Posted July 23, 2012 Contributing Member Report Posted July 23, 2012 Your work looks fantastic!!! Bob Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members OdinUK Posted July 23, 2012 Members Report Posted July 23, 2012 Very nice! Do you have a picture of the inside? Were the layers glued first before sewing? I like it:) Quote Lord Of Leather
Members Jarrett V Posted July 23, 2012 Author Members Report Posted July 23, 2012 Very nice! Do you have a picture of the inside? Were the layers glued first before sewing? I like it:) The liner was contact cemented after the top was tooled and dyed and after trimming the liner, I finger carved the liner, then stitched. Quote
Members Jimbob Posted July 23, 2012 Members Report Posted July 23, 2012 Made comment before, but again....cool work and I love the"finger carving"....super clean!! James Quote http://www.elfwood.com/~alien883 First it is just leather....then it is what-ever I can dream off...
Members OdinUK Posted July 23, 2012 Members Report Posted July 23, 2012 Thanks for explaining and for the picture! Very nice work. Quote Lord Of Leather
Members Dallas Cowboy Posted July 25, 2012 Members Report Posted July 25, 2012 What machine do you use to sew your belts? Quote
Members Jarrett V Posted July 25, 2012 Author Members Report Posted July 25, 2012 What machine do you use to sew your belts? I use a Cobra Class 4 on almost everything now. Quote
Members Dallas Cowboy Posted July 26, 2012 Members Report Posted July 26, 2012 Do you glue your belts to a pice of plexiglass before you case it to prevent shrinking? I know its recommended for sheridan tooling on book covers and such but i wasn't sure if it was used for belts that are tooled or stamped? Thanks again. DC Quote
Members Matt Alsaker Posted July 26, 2012 Members Report Posted July 26, 2012 I use a Cobra Class 4 on almost everything now. I have a Cobra Class 4, but have not tried 138 thread. What size needle are you using and do you use the standard shuttle hook? Quote http://www.alsakercustomleather.com/ https://www.facebook.com/AlsakerCustomLeather?ref=hl
Members Jarrett V Posted July 26, 2012 Author Members Report Posted July 26, 2012 Do you glue your belts to a pice of plexiglass before you case it to prevent shrinking? I know its recommended for sheridan tooling on book covers and such but i wasn't sure if it was used for belts that are tooled or stamped? Thanks again. DC I use painters tape on the back of my belts, it keeps them from distorting I have a Cobra Class 4, but have not tried 138 thread. What size needle are you using and do you use the standard shuttle hook? Off the top of my head, I think I'm using a 21 needle and yes I am using the standard shuttle hook. You just have to play with the tension for a while, but if you can get it set properly you can sew about any thickness with minimal adjustment. I have sewn with 69 thread on my cobra and have had no problems or skipped stitches. Quote
Members chazrull Posted July 26, 2012 Members Report Posted July 26, 2012 Truly beautiful work Jarret - from design to dye. Quote
Members Sir Robert Posted July 29, 2012 Members Report Posted July 29, 2012 Very beautiful work. Quote
Members shtoink Posted July 29, 2012 Members Report Posted July 29, 2012 I have opened this thread up about 35 times, and still cannot get over how amazing this belt looks. I didn't think it could have been any cooler until I saw the shot of the inside... It's bitter sweet. I love looking at it and it gives me a goal to work towards, however it's so damned nice it makes me want to pack everything up and quit, because I am worried I won't achieve that goal. Simply amazing... I am elated that you decided to share it. Quote
Members morgans leather Posted July 31, 2012 Members Report Posted July 31, 2012 Very very very nice work love the attention to detail inside and the tooling makes me want to make one now Quote
Members Jarrett V Posted July 31, 2012 Author Members Report Posted July 31, 2012 Thanks to everyone for the great compliments, I just wish I could get some more critiquing. This thing is far from perfect, I'm still a newb (tooling for a year and a half). Quote
LNLeather Posted July 31, 2012 Report Posted July 31, 2012 (edited) This thing is far from perfect, Who says your work is far from perfect? I think there are a lot of folks here that would Totally disagree with you and actually envy your talent and accomplishments. Believe me and all others that have commented here...... Your work is Superior and you should not be dismayed that there are no complaints or critiquing. Your work is Very Good! Very Very Very Good! If you have only been tooling for 1 1/2 years - it is Exciting to think what you are going to accomplish... Edited July 31, 2012 by LNLeather Quote ~Cheryl There are many things in life that will catch your eye, but only a few will catch your heart... pursue those...
Members Jarrett V Posted July 31, 2012 Author Members Report Posted July 31, 2012 Who says your work is far from perfect? I think there are a lot of folks here that would Totally disagree with you and actually envy your talent and accomplishments. Believe me and all others that have commented here...... Your work is Superior and you should not be dismayed that there are no complaints or critiquing. Your work is Very Good! Very Very Very Good! If you have only been tooling for 1 1/2 years - it is Exciting to think what you are going to accomplish... Thank you!! Quote
Members Charliewz Posted July 31, 2012 Members Report Posted July 31, 2012 Who says your work is far from perfect? I think there are a lot of folks here that would Totally disagree with you and actually envy your talent and accomplishments. Believe me and all others that have commented here...... Your work is Superior and you should not be dismayed that there are no complaints or critiquing. Your work is Very Good! Very Very Very Good! If you have only been tooling for 1 1/2 years - it is Exciting to think what you are going to accomplish... I agree with Cheryl Charlie Quote
Members HEAVY LEATHER Posted August 1, 2012 Members Report Posted August 1, 2012 Truly exquisite... Your customer surely will be happy. Quote
Members Bigfoot Posted August 23, 2012 Members Report Posted August 23, 2012 Thanks to everyone for the great compliments, I just wish I could get some more critiquing. This thing is far from perfect, I'm still a newb (tooling for a year and a half). Hi Jarret, It does look very nice to me but if you want a critique then my eye will find it!.... the first thing I noticed was that the decorative cuts on the outside of the belt look a bit "lost" and don't flow with the design. My understanding of floral is that everything should "flow". The only other thing that I noticed was that mules foot was too big or tapped too hard as it is out of proportion with the design. I too am a newb and very rarely carve floral but maybe this post will get some of the more experienced carvers to post or you could post this in "critique my work" for more response? Keep up the great work though! All the best Bigfootleather Quote
Members ttucker Posted August 24, 2012 Members Report Posted August 24, 2012 The style and Color are really great. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.