Jump to content
red3

Sine Wave Stiching Template

Recommended Posts

Does anyone know where I can get a template that will allow me to draw the sine wave pattern the you see on so many gun belts? I would like to try it on a belt or two but there is no way I'm gonna free hand it.....

Thanks for the help

Share this post


Link to post
Share on other sites

I have seen a ruler like tool that is made by Fiskars. Unfortunately, I can't find it on their site anymore, so I don't know how availability will be for you. I did find an online art supply store that at least had it and you can see what it looks like. I have one and had actually thought about using it for a guide to cut the edges of my leather patterns with, but the stitches sound cool, too.

Share this post


Link to post
Share on other sites
  On 11/6/2012 at 4:28 AM, red3 said:

Does anyone know where I can get a template that will allow me to draw the sine wave pattern the you see on so many gun belts? I would like to try it on a belt or two but there is no way I'm gonna free hand it.....

Thanks for the help

If you have a ruler with fine markings, you can draw it out by hand.

A Sine wave is a mathematical function, so you can use a spreadsheet program to create the numbers quickly & easily.

1. Draw a long straight line on a paper.

2. Draw a line through that line. Where the lines cross is your 'zero' point.

3. Make a column of numbers, 0-4 for example. Make sure to include decimal numbers. Ideally the numbers should be even increments. This will be the distance along the long line from your 'zero' point. Label this column so you know what it is. I used X.

4. Write a number at the top of the next column, and a letter. I used Y. This is the max height of the sine wave. Let's use 2 since this is a gun belt.

5. Your math function will be: Height = Y* sin(X) where X is the number in the 1st column, and Y is the max height.

Here's what the chart looks like:

2.00

X Y

0.00 0.00

0.10 0.20

0.20 0.40

0.30 0.59

0.40 0.78

0.50 0.96

0.60 1.13

0.70 1.29

0.80 1.43

0.90 1.57

1.00 1.68

1.10 1.78

1.20 1.86

1.30 1.93

1.40 1.97

1.50 1.99

1.60 2.00

1.70 1.98

1.80 1.95

1.90 1.89

2.00 1.82

2.10 1.73

2.20 1.62

2.30 1.49

2.40 1.35

2.50 1.20

2.60 1.03

2.70 0.85

2.80 0.67

2.90 0.48

3.00 0.28

3.10 0.08

3.20 -0.12

3.30 -0.32

3.40 -0.51

3.50 -0.70

3.60 -0.89

3.70 -1.06

3.80 -1.22

3.90 -1.38

4.00 -1.51

In this case, I used inches, and it starts at 0, crests to 2 inches high (as measured up from the long line) at 1.6 inches from 0, and goes back to the long line at 3.14 inches, then it starts to go below the long line.

If you want to keep the same height but stretch the sine wave out, add a multiplier to the X value inside the equation. For instance, to stretch the wave out to twice the length, use the formula Height = Y* sin(0.5 * X).

Once you get it where you want it, you can trace over the graph onto the tracing paper and then onto the leather.

If you want to get really fancy with it, you can use other math functions. I refer you to a good highschool trig or geometry textbook for that, though.

Edited by CowboyDan

Share this post


Link to post
Share on other sites

You can use a spreadsheet and its graphing functions to make a paper template. See attached file. Sine Wave Double.txt Download and change the file extension to .xls so you can open it in Excel or a compatible program.

You can stretch the chart to print it out however you want. You can enter a multiplier in cell C1 to change the proportions.

Or you can use this as a guide for building your own file. It has been awhile since I used trig functions in Excel, so I had forgotten that the functions use radians as the input rather than degrees. Chart looked awful screwy. So finally I figured out, have to convert degrees to radians, so the conversion is buried in the cell formulas.

The file is safe, however you should always scan downloaded files for viruses. I run Microsoft Security Essentials. It's free and Microsoft has to keep it slim to promote fast execution using their OSs.

Tom

Share this post


Link to post
Share on other sites

I don't know why I never thought of using Excel...

I have used Excel to do some pretty sophisticated things and I feel so silly not thinking about using it to generate a custom shape like that.

Thanks for the suggestion.

Share this post


Link to post
Share on other sites

Thanks guys for the upper math lessons....I'm gonna give it a try......

Share this post


Link to post
Share on other sites

post-46556-0-94600100-1383917332_thumb.g

I realize this is an old topic, but I have a sine wave belt pattern.

Share this post


Link to post
Share on other sites

It does seem like a fella needs a radius, don't it. Too bad they don't have like hobby stores that sell circle and arc templates for a couple bucks. Ooooo... wait .....

Share this post


Link to post
Share on other sites

The sine wave pattern as it is refered to in this thread is commonly refered to as the gunfighter stitch or fish tail stitch. Black River Laser has the template for both hand sewing and machine stitching.

Share this post


Link to post
Share on other sites

I did my pattern using Corel Draw. In fact, I make all my patterns using Corel Draw because I can get nice curves instead of trying to draw them by hand.

Share this post


Link to post
Share on other sites

I just use anything circular to hand, which is the required size & draw around it.

Share this post


Link to post
Share on other sites

It's easier to cheat- I use a curved stitch marking iron, I have 3 -8,10 and 12 to the inch and just use the one I fancy for the belt I am doing.

Share this post


Link to post
Share on other sites

I just take a piece of typing or construction, or card stock paper and fold it in half.

Then I just cut a wavy piece away from the fold. Then I open the fold and there you go.

A wavy pattern to stitch.

I adjust as needed.

Joel

Share this post


Link to post
Share on other sites

Or use your dividers to mark a light centerline and outside borders. Then use an object such as a paper plate to mark the outside radius of the plate over a chosen distance such as 8" to 10", just make sure it divided evenly over the length of the belt. lightly mark that radius to the ends of the belt and stitch. no need to reinvent the wheel or make it more comlicated.

Bro Tim

Share this post


Link to post
Share on other sites

I used to use the paper plate and it works great. However Joyce at Blackriver laser has the templates for hand stitching and for machine stitching in I thhink three deifferent belt sizes. Lay the template on the belt use a scratch awl to mark the stitch holes for hand sewing and get to stitching.

Edited by camano ridge

Share this post


Link to post
Share on other sites

I agree that Joyce has the easiest option and if I were to be using the pattern on a regular basis I would purchase the template.

Bro Tim

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...