Contributing Member Bob Blea Posted February 3, 2013 Contributing Member Report Posted February 3, 2013 Hello, I recently made this as a custom order. Someone saw a 5X8 notebook I have listed on Etsy and requested the same geometric stamp design but in a larger portfolio that would hold a 8x11 notepad. I had not tried making this design on a piece of leather that big. It involves two different box stamps that alternate in a checkerboard like pattern and it's a challenge to keep square. However, it turned out really good. The notebook is made from 4 oz vegtan with a dark brown pigskin lining. The inside pocket is 2 oz. vegtan. It's all laced with dark brown leather lace. The customer loved it when she got it, so it was a successful project. Any comments or criticisms welcome. Bob Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members rosiart Posted February 3, 2013 Members Report Posted February 3, 2013 Very Nice!! I have trouble keeping one square for more than a couple rows, can't imagine doing two over that much distance. Bravo! Quote Rosemary RosiArt's Blog
Members benlilly1 Posted February 3, 2013 Members Report Posted February 3, 2013 Lovely...and I really like that geometric stamp design! I'm sure she loved it! Quote
Members lightningad Posted February 3, 2013 Members Report Posted February 3, 2013 holy moley - you must have a steady hand! very impressive control with that stamping. Quote "You is what you am, a cow don't make ham!" Frank Zappa - Musical Visionary Barking Rooster Leather Goods Pinterest Page
Moderator immiketoo Posted February 3, 2013 Moderator Report Posted February 3, 2013 Bob, that is an impressive bit of stamp work right there. Nicely done! Quote Learnleather.com
Contributing Member Bob Blea Posted February 3, 2013 Author Contributing Member Report Posted February 3, 2013 Thanks for the compliments. It really is a matter of practice and having a good technique. I've struggled with doing this type of stamp over a large area for years, but I think I've finally got a technique that works pretty well. I was thinking I should write up something on how I do these because I didn't find that much information out there on using them. Bob Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members MakerUnknown Posted February 3, 2013 Members Report Posted February 3, 2013 Striking. Quote http://cargocollective.com/makerunknown
Members rosiart Posted February 3, 2013 Members Report Posted February 3, 2013 Thanks for the compliments. It really is a matter of practice and having a good technique. I've struggled with doing this type of stamp over a large area for years, but I think I've finally got a technique that works pretty well. I was thinking I should write up something on how I do these because I didn't find that much information out there on using them. Bob I would love to see this tutorial when it makes the light of day. Keep us posted and thanks. Quote Rosemary RosiArt's Blog
Members LederRudi Posted February 3, 2013 Members Report Posted February 3, 2013 I would love to see this tutorial when it makes the light of day. Keep us posted and thanks. Same here. Approximately 713 opportunities for converting such a project into scrap leather! Once again I pull my hat, Bob! Rudi Quote "If you work for a living, why do you kill yourself working?" Tuco Ramírez
Members Jason Chaney Posted February 3, 2013 Members Report Posted February 3, 2013 I would also love to see how you do that. My reaction when I looked at the picture was a little like immiketoos avatar. Thanks for sharing. Quote
Contributing Member Bob Blea Posted February 3, 2013 Author Contributing Member Report Posted February 3, 2013 Thanks all. Yes, there are many opportunities for converting this into scrap. Though I had a few times too, but it came out pretty even overall. In the future I think it makes more sense to make this notebook in two pieces, a front and back cover, and then sew each to a spine. That way if I mess up one side, I only ruin that part of it. Only reason I didn't do that was because I don't think my hand sewing skills are good enough yet. I'm working on that now though. Thanks again for the nice compliments. I will try to write something in the next few weeks on this. I've taken a few pictures showing what tricks I've come up with, but need to write it up. Bob Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members Double U Leather Posted February 3, 2013 Members Report Posted February 3, 2013 Bob, I don't know how I missed this, but WOW!! I've never done any geometric things, but I'd sure like to learn. Looks to me like you'd be the one to go to figure it out. Very nicely done. Quote
LNLeather Posted February 3, 2013 Report Posted February 3, 2013 Wow, Bob, your skill with the geometric stamp is flawless... The closeup shot is Awesome! This clearly shows a High Quality of workmanship... I really enjoy seeing your work Quote ~Cheryl There are many things in life that will catch your eye, but only a few will catch your heart... pursue those...
Contributing Member Bob Blea Posted February 4, 2013 Author Contributing Member Report Posted February 4, 2013 Thanks Double U and Cheryl, I really appreciate the comments. You are both too kind. Bob Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members PenCapChew Posted February 5, 2013 Members Report Posted February 5, 2013 Flawless work my friend! BTW, thanks for describing materials used for a rookie! haha Quote
Contributing Member Bob Blea Posted February 6, 2013 Author Contributing Member Report Posted February 6, 2013 Flawless work my friend! BTW, thanks for describing materials used for a rookie! haha Thank you for the compliment! And by the way, I hadn't mentioned but the stamps are by Wayne Jueschke of Elko, NV who I think makes some of the best geometric stamps out there. I just love his tools. Bob Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members Aurelie Posted February 7, 2013 Members Report Posted February 7, 2013 I would love to see this tutorial when it makes the light of day. Keep us posted and thanks. Ditto Quote In for a penny, in for a pound....
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.