All4Christ Report post Posted February 6, 2014 I have gone through all the old posts on pricking irons. I'm having a very hard time finding any suppliers state side that sells Joseph Dixon pricking irons. Does any one know any suppliers this side of the pond that sells these irons? I did get a pricking chisel from CS Osborne but its just not the same thing. Quote Share this post Link to post Share on other sites
All4Christ Report post Posted February 7, 2014 Ok I decided to pm Joseph Dixon here on the forums where low and behold he has listed a US contact. I'm finally getting me a Dixon iron! Booth & Co. out of Peabody, Ma. http://www.boothandco.com/index.html Send Ken Chapman an email at kenchapman@boothco.com He has been most gracious to me. Booth & Co have quite a bit to offer. Quote Share this post Link to post Share on other sites
Bob Blea Report post Posted February 7, 2014 Thanks for the link. I had never heard of this company before. Bob Quote Share this post Link to post Share on other sites
Fowlingpiece Report post Posted February 7, 2014 Ken is top notch!! Quote Share this post Link to post Share on other sites
SLudlow Report post Posted February 7, 2014 I'm salivating about the historical leather! Quote Share this post Link to post Share on other sites
awharness Report post Posted February 7, 2014 Ken is a great guy! Im close enough to be able to swing in and pick things up. He's the guy for english tanned leathers, bridle, billet and leather for english saddle seats. He has it in stock and sources and brokers material all around the world. Its not cheap leather, but ken is really fair. Quote Share this post Link to post Share on other sites
Chris B Report post Posted February 8, 2014 Thanks for the link!!! Can anyone else get the tool catalog to load? All that comes up is a black page, and I did check, my adobe is at its current version. Thanks, Chris Quote Share this post Link to post Share on other sites
jackd942 Report post Posted February 8, 2014 It loaded on my ipad Chris. Quote Share this post Link to post Share on other sites
Chris B Report post Posted February 9, 2014 Thanks Jack. Im going to have to figure whats going on with my puter.... Thanks, Chris Quote Share this post Link to post Share on other sites
Chris B Report post Posted February 9, 2014 I got it! Had to use Internet Explorer instead of Google Chrome. Thanks, Chris Quote Share this post Link to post Share on other sites
