Jump to content

Recommended Posts

  • Members
Posted (edited)

So I got so much great feedback I decided to make another roll top bag. This one is made out of Horween Dark Cognac Essex. I used all copper rivets and antique brass snaps. I think the colors look very nice with this bag.

I also used size 138 thread which definitely looks better. Although my machine does not like it. I get skipped stitches as well as top thread fraying a lot with size 138 thread. I need to try and figure that out...any tips would be great appreciated. I'm using a size 22 needle with an adler 67 sewing machine.

I added finger tabs for the the snaps because on the original bag its a b*tch to snap the flap closed. The tabs help a ton!

This is the first time I've used copper rivets as well. OMG I love them so much more than rapid rivets.

Thanks again for all the comments on the last thread. It helped me make this bag which I think is definitely an improvement!

Joe

post-50407-0-88531600-1411158168_thumb.j

post-50407-0-59782200-1411158176_thumb.j

post-50407-0-21835300-1411158261_thumb.j

Edited by Hi Im Joe
  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted

have you considered sewing the bottom half of the bag using a different style of bottom? For example with leather stiffener on the bottom or with leather reinforced edges to add more emphasis to the bottom part on the bag.

post-34060-0-36487500-1411159083_thumb.j

  • Members
Posted

Looks really good! The copper rivets work really well with that color. I love the way the roll-top strap snap attaches so that you can get ahold to snap/unsnap it! The stitching is looking good too.

Well done!

Bill

  • Members
Posted

Bags look nice. I want to start making bags soon. Quick question, why the roll top instead of something like a zipper or hasp?

  • Members
Posted

Very Nice!

What do you use inside the handles to help them keep their shape (fullness)?

Thank you! At first I used a poly or nylon cord but now I don't use anything. I just glue the edges and fold it over.

have you considered sewing the bottom half of the bag using a different style of bottom? For example with leather stiffener on the bottom or with leather reinforced edges to add more emphasis to the bottom part on the bag.

Umm...no. For this bag I intended to make a t-slot style tote bag like the daytripper from teranishi. My next bag will be some type of "doctor" style bag...meaning a separate bottom with no gussets on the side. Basically the bottom will dictate the width of the bag. I'm going to try and mock up some stuff with paper to get the pattern right because I've never made a bag like that before. I'm sure it will take some trial and error (probably more error).

Looks really good! The copper rivets work really well with that color. I love the way the roll-top strap snap attaches so that you can get ahold to snap/unsnap it! The stitching is looking good too.

Well done!

Bill

Thanks Bill! The finger tab was an absolute necessity after making the first version. It was a total bitch to snap the flap closed without the finger tab.

Bags look nice. I want to start making bags soon. Quick question, why the roll top instead of something like a zipper or hasp?

I've done some zipper topped bags as well but really it was just a style choice. I like how it looks. There really is no functional reason. In fact it's really not the most practical of bags to get into but I like how it looks so...I went with it.

So good. Beautiful version - and much improved. Do you have any shots of it open?

Thank you sir! I'll try to take a shot of it unrolled tomorrow and post it up.

.

  • Members
Posted

Your first bag was really nice, but this one blows it out of the water. The copper adds to the overall warmth of it, and the white stitching (love the thickness of it, by the way, well worth it being a pain) makes it really pop.

"Everyone with telekinesis, raise my hand!" -Repairman Jack

  • Members
Posted (edited)

Just read your post about the frayed thread. I went through that when I switched to 138.

What I found is that indexing the needle properly was key with the larger thread. When I used #92 thread, it really wasn't that big of an issue. However, when I switched to 138, I found that the slot on the needle has to be aligned perfectly, or it causes fraying problems. The needles I use don't have a flat spot to index them, so I have to watch very carefully to keep the grooved side of the needle on the left and not twisted any to the back or front. Another thing I noticed that would cause problems is if the bobbin was almost empty, or the needle is dull/nicked.

I just read another post of the Leather Sewing Machine forum that said you can easily index the needle by using a toothpick.

Edited by Colt W Knight
  • Members
Posted (edited)

What a difference the experience of having made a project for the first time makes! That second time it always seems to work out so much better than the first.

So it is with your bags, Joe. This second one is really a statement of your personal tastes as well as a testament to your ever-increasing leatherwork skills. My hat is off to ya!

As to a zipper versus your roll-top, I see lots of zipper-top bags of varying quality of design and build, but few rolls-tops. Roll tops harken back to a previous era before YKK existed. The roll-top design, with properly treated leather makes a good water and dust-tight seal, probably better than anything but a water-resistant zipper of today's design and manufacture. In fact, it is how those water-proof bags that are made for boating and rafting today are constructed.

You are talking about your next bag. Have you ever seen a Portmanteau bag, circa 1700-1900? I think one would be a natural extension of the direction you're taking. It too would be a unique period piece rather than just another modern-looking bag. Retro is good these days.

https://img0.etsystatic.com/028/0/5147816/il_340x270.621944846_r7ha.jpg

Keep it up, Joe. I can't wait to see what you come up with next. You are the Joe Namath of leatherworker.net in the sense that I can't wait 'till tomorrow because your leatherwork gets better every day. :)

Michelle

Edited by silverwingit

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...