Contributing Member JLSleather Posted July 6, 2015 Contributing Member Report Posted July 6, 2015 Dropped the aluminum 'dummy' for the Charter Bulldog off'n the table. Landed just right, no longer has a hammer on it. Concrete floor meets aluminum casting .... yeah. Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Moderator Art Posted July 6, 2015 Moderator Report Posted July 6, 2015 I guess a bulldog really can't be considered a "pocket gun", but now you have one of the few. Art Quote For heaven's sakes pilgrim, make yourself a strop!
Members WinterBear Posted July 6, 2015 Members Report Posted July 6, 2015 JB Weld? Quote I used to be an Eagle, a good ol' Eagle too...
Contributing Member JLSleather Posted July 6, 2015 Author Contributing Member Report Posted July 6, 2015 Maybe shoulda put the position of a thumb break strap ana snap BEFORE this? Oh, well, it'll still make a holster ... maybe one day I'll git another one. I thought about havin' this feller up the road weld it - build it up - but that's probably more money than a new dummy! You might be right A' -- maybe SUMthin kin stick it back on there ... Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members byggyns Posted July 7, 2015 Members Report Posted July 7, 2015 Yeah, JB Weld will work just fine since you don't have to worry about it being a structural or load bearing piece. Quote
Members groovytech Posted July 8, 2015 Members Report Posted July 8, 2015 Get it "tacked' back on by a welder or get a 200w soldering iron and solder it back on. Quote Be Nice. Do Good. Have Fun.
Members billybopp Posted July 9, 2015 Members Report Posted July 9, 2015 Talk the gun maker into introducing a hammerless model. Quote
Members chiefjason Posted July 17, 2015 Members Report Posted July 17, 2015 The list is long and glorious. Dropping the new round knife and chipping the end. Dropping a round knife onto a side of leather and cutting it. Hope I can work around it. Dropping contact cement on the same hide. GRRRR. Putting 8/32 T nuts in instead of 6/32. Putting a hole in a nearly new membrane for my vacuum table. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.