Members Jwfarms Posted October 29, 2015 Members Report Posted October 29, 2015 (edited) Hey Newbee here, I have a Singer sewing machine model 45K76 that I cant find a operators manual to. I was thinkin bout gettin into leather working and the machine was given to me. It runs great and it has the feed dogs on it (which I'm told this machine did not have). Anyhow I would like to know how to feed the thread properly and set the bobbin up in it. I've look on the internet with no luck. If someone could help me out in finding a manual it would be greatly appreciated......tanx Edited October 29, 2015 by Jwfarms Quote
Members Ole South Posted October 29, 2015 Members Report Posted October 29, 2015 (edited) Singer 45K76 Industrial Machine (From Ismacs.net) Needle: 214x5, 214x7 and 214x13 Cylinder bed, NO FEEDING MECHANISM. Drop feed, needle bar link, lifting presser. Friction controlled balance wheel and work plate. For darning sacks. Post a picture perhaps? Edited October 29, 2015 by Ole South Quote
Members Constabulary Posted October 29, 2015 Members Report Posted October 29, 2015 Check this thread: http://leatherworker.net/forum/index.php?showtopic=61619 Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Jwfarms Posted October 29, 2015 Author Members Report Posted October 29, 2015 (edited) Hey Constabulary, tanx...thats exactly what I needed. Im gonna print them out later and study...I want to download a couple pics so u can see what I have. I think it's a 45K76 modified. But Im gonna haveta resize them....headin to work will work on it later. Just wanted to thank u... Edited October 29, 2015 by Jwfarms Quote
Members jimi Posted October 29, 2015 Members Report Posted October 29, 2015 Hey JW, yes send some pictures of your machine if possible! http://dixiesewingmachine.tzo.com/MANUALS/SINGERPARTS2/45K57,75,76,87.pdf Quote
Members Jwfarms Posted October 29, 2015 Author Members Report Posted October 29, 2015 Hey Jimi, check these out let me know what you think...tanx Quote
Members Jwfarms Posted October 29, 2015 Author Members Report Posted October 29, 2015 a couple pics of the motor Quote
Members Constabulary Posted October 30, 2015 Members Report Posted October 30, 2015 (edited) Now thats a fly whee / pulley . Machine over all looks not bad - not very much dirt and oil gunk as far as I can tell and all parts seem to be present. Have you sewn with it? Anyway, I´d clean and oil it thorougly and keep it well oiled! EDIT: BTW - what I don´t see is a bobbin winder. Edited October 30, 2015 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members dikman Posted October 30, 2015 Members Report Posted October 30, 2015 Makes my 8" pulley look awfully small!!!!! Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members Constabulary Posted October 30, 2015 Members Report Posted October 30, 2015 One of the cases where you can´t deny that size matters Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.