Jump to content

Recommended Posts

  • Members
Posted

Nice.
Stitching looks good, which technique did you use? Pre-punched holes or by awl one by one?

Edges looks to need some work though. How many layers of paint, and did you heat treat them?
Don't mean to steal your thunder, just that I just finished a bunch of bracelets using Fenice and learned the hard way that it's more difficult to work with that than just burnishing the traditional way (which of course can't be done on some leathers...), so I'm very interested in how people use it.

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted

Decorative holes are pre-punched with Blanchard irons (No 8). Internal seams like sides and bottom are pre-punched with the unloaded sewing machine in order to keep even distance. My edges are far from perfect. I use paint, heat treatment, sandpaper, but I am not a big fan of this paint. Bought Vernice 600, looks much better compared to Fenice. I know, that I need more practice and more coats of paint/sanding.

  • Members
Posted

Decorative holes are pre-punched with Blanchard irons (No 8). Internal seams like sides and bottom are pre-punched with the unloaded sewing machine in order to keep even distance. My edges are far from perfect. I use paint, heat treatment, sandpaper, but I am not a big fan of this paint. Bought Vernice 600, looks much better compared to Fenice. I know, that I need more practice and more coats of paint/sanding.

Thanks for the reply, and yes, with the edges it takes a bunch of layers to get it done good.

Regarding the stitching I think it looks awesome with the distances but as you can see in your first pic in the OP it's a bit uneven between the handles, did you use any kind of marking of the stitchline before pre-punching?

In the few Hermès vids I've seen on youtube they use a creaser to mark the line before sewing, did you do something similar?

I'm about to make a small handbag just for 'training purposes' so trying to figure out how to make things the best way before I ruin quite a lot of expensive leather...

  • Members
Posted (edited)

I do mark edges with the creasing iron, then punch with the Blanchard iron. I have only a short irons, 6 teeth, so that why it can get uneven. I am only doing leatherwork for year and half, so need a lot of practice. Holes on the decorative side seams and leather strip inside, that covering seams are made separately, then pieces were aligned later during stitching process. Don't forget to make holes from the correct sides in this case:) Covering strip has to be punched from the wrong ( reverse) side to much punched angled holes. I can add more pictures that I took with my phone, but I don't have too many of them. I did trial bag for my mom previously and learned my mistakes there :)

Edited by olenawills
  • Members
Posted

I do mark edges with the creasing iron, then punch with the Blanchard iron. I have only a short irons, 6 teeth, so that why it can get uneven. I am only doing leatherwork for year and half, so need a lot of practice. Holes on the decorative side seams and leather strip inside, that covering seams are made separately, then pieces were aligned later during stitching process. Don't forget to make holes from the correct sides in this case:) Covering strip has to be punched from the wrong ( reverse) side to much punched angled holes. I can add more pictures that I took with my phone, but I don't have too many of them. I did trial bag for my mom previously and learned my mistakes there :)

Thanks, I appreciate the tips and I guess some of them were learned the hard way... :)

  • Members
Posted (edited)

Those seams are necessary because they covering inside of the side seams. Lining has permanently glued to the leather.

Edited by olenawills
  • Members
Posted

Oh, I wasn't saying they weren't necessary, I was saying you really went the extra mile to make it nice inside. My only criticism is for the small pieces of leather with the feet on the bottom. If you round the corners a bit, that part will look more intentional, IMO.

  • Members
Posted

This has to be THE nicest bag I've ever laid my eyes on ! Period ! Not taking anything away from other makers,

it is just, i think the color materials you've mated together compliment one another Exqusitely

And, I know there is alot of work in hand stitching as well.! --- Wild Bill46

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...