Members SolarLeatherMachines Posted April 7, 2017 Members Report Posted April 7, 2017 12 hours ago, Ferg said: No one should tell you that learning to use a power skiver is easy. Not for the faint of heart. Your eventual results will make a believer out of you. Precisely. This is NOT a beginner machine, but nothing works like it does. Alexander
Contributing Member Ferg Posted April 7, 2017 Author Contributing Member Report Posted April 7, 2017 Mark842, This machine weighs about 90 pounds without the table and servo. It would need to be "Crated" and packed with impact resistant foam board. That also means I would need to break the legs/table down and pack them separately. Since I have no idea what your area code is I can't give you a figure on the shipping. I will help you all I can, shipping these things is expensive. Ferg
Northmount Posted April 7, 2017 Report Posted April 7, 2017 2 hours ago, Ferg said: Mark842, This machine weighs about 90 pounds without the table and servo. It would need to be "Crated" and packed with impact resistant foam board. That also means I would need to break the legs/table down and pack them separately. Since I have no idea what your area code is I can't give you a figure on the shipping. I will help you all I can, shipping these things is expensive. Ferg His IP address puts him at Ogden, Utah, 84405 Tom
Members Sonydaze Posted April 7, 2017 Members Report Posted April 7, 2017 4 hours ago, Ferg said: Mark842, This machine weighs about 90 pounds without the table and servo. It would need to be "Crated" and packed with impact resistant foam board. That also means I would need to break the legs/table down and pack them separately. Since I have no idea what your area code is I can't give you a figure on the shipping. I will help you all I can, shipping these things is expensive. Ferg Hi Ferg, Just take the head off, Put cardboard over the table top and strap the whole unit (upright) to a pallet. Box the head and strap the box to the pallet under the table. I had one come that way from Los Angeles to Vancouver Island, no problem. I would call Fedex Ground for a shipping quote. http://www.bound2please.com Sewing machines: 3 - Sunstar 590BL, Artisan Toro 3200, Juki LK-1900HS, Juki DDL-8500-7, Juki DDL-5550N, Pfaff 138-6/21, Pfaff 546-H3, Pfaff 335-H3, Adler 221-76, Singer 144WVS33, Singer 29K-51, Siruba 747B
Members SolarLeatherMachines Posted April 7, 2017 Members Report Posted April 7, 2017 Buy Freight Insurance. Alexander
Contributing Member Ferg Posted April 7, 2017 Author Contributing Member Report Posted April 7, 2017 (edited) Mark842 Looks as though I would have to have $200 - $225 to ship to you. That doesn't include Insurance. I gave $1500 for the machine, you would still be getting deal. lol Edited April 7, 2017 by Ferg
Mark842 Posted April 7, 2017 Report Posted April 7, 2017 I'm interested but it would have to wait till July for me. Been buying and the budgets a little thin right now. That being said, I know this is a great deal. If I could now I would. If it is still available come July I'll be contacting you. Thanks! Mark
Contributing Member Ferg Posted April 7, 2017 Author Contributing Member Report Posted April 7, 2017 Keep in mind, if anyone says they want the machine before July, it will be sold. Thanks for your interest. Ferg
Mark842 Posted April 7, 2017 Report Posted April 7, 2017 Of course. I expect no less! I've just bought a couple new machines, some new dies, and worst of all, the tax man cometh next weekend. if its still available in July I'll yell at you and we will work it out. Thanks, Mark
Members leatherman1 Posted March 2, 2022 Members Report Posted March 2, 2022 On 7/22/2016 at 5:20 AM, RockyAussie said: I cant believe I see no questions in regards to buy. If it were over here I would already be on your doorstep. Must be the GFC or something. Did you bye it brand new? Is it still available?
Recommended Posts