Members Forester Posted February 23, 2017 Members Report Posted February 23, 2017 Hi All Does anybody have a pattern for this kind of mag pouch, I am trying to use it to make a sheath for my multi tool. Not my picture borrowed it of the web Regards Forester Quote
Members Red Bear Haraldsson Posted February 23, 2017 Members Report Posted February 23, 2017 I don't have a pattern, but I found a picture of the back of it, if it helps... Quote
Members Forester Posted February 23, 2017 Author Members Report Posted February 23, 2017 Thanks Red Bear, I have that photo as well, I have been scratching my head thinking how its put together. Forester Quote
Members OLDNSLOW Posted February 23, 2017 Members Report Posted February 23, 2017 I am not really adding anything here but, it is a horizontal mag pouch if that does help any and Blackhawk and another company sells them on amazon for like 25 bucks. I was going to buy one to dissect it but never did. Quote
Members Joon1911 Posted February 24, 2017 Members Report Posted February 24, 2017 On 2/23/2017 at 4:52 PM, Forester said: Thanks Red Bear, I have that photo as well, I have been scratching my head thinking how its put together. Forester Actually the back picture is quite helpful in figuring out the construction. Just looking at the front picture I would have guessed that there were two pieces of leather sewn together at the long edge to form the wrap around belt loop BUT...the back picture shows the ingenuity of the design. Basically one L-shaped piece of leather sewn along the bottom and one long edge after one fold. The remainder of one L forms the belt strap and the other forms the strap. Quite simple and quite elegant. Sorry i I don't have a pattern for you though. Quote
Members chiefjason Posted February 25, 2017 Members Report Posted February 25, 2017 Yeah, it's one piece. Neat design. For ease of patterning thought I would go 2 pieces. Another bonus is you save material. Odd patterns like that just feel like they take up too much usable leather and the cuts left on the hide become unusable sometimes. You are probably going to have to get some card stock and work the pattern out there. Quote
Members Forester Posted February 25, 2017 Author Members Report Posted February 25, 2017 Hi All Thank you for your replies, will keep trying. Regards Forester Quote
Members plinkercases Posted February 26, 2017 Members Report Posted February 26, 2017 I have been experimenting and unless it is two layers bonded flesh to flesh (this I don't think it is since there is only stitching at the pouch seems and the edges look single layered) the only way I can see it working (and based on the double stitch line on the long side) I think it is two pieces joined at the long seam with the grain side facing opposite directions so you can have stamping on the retention strap and the belt loop wrap around. So I would build it like this. - if two layers then it can be one piece) Quote
Members Joon1911 Posted February 26, 2017 Members Report Posted February 26, 2017 12 hours ago, plinkercases said: I have been experimenting and unless it is two layers bonded flesh to flesh (this I don't think it is since there is only stitching at the pouch seems and the edges look single layered) the only way I can see it working (and based on the double stitch line on the long side) I think it is two pieces joined at the long seam with the grain side facing opposite directions so you can have stamping on the retention strap and the belt loop wrap around. So I would build it like this. - if two layers then it can be one piece) Plinker, I think you've got the body of the pouch on the wrong side of the seam. I base this on the location of the stitch line. I could be way off base seeing as I'm basing this on two photos of the actual item without being able to see it in three dimensions. Quote
Members Joon1911 Posted February 26, 2017 Members Report Posted February 26, 2017 Forester, Listen, I suspect you are going to have to do as chiefjason suggested and get out some paper and make a paper pattern for the particular item in question to get actual sizing. I took a 1911 mag and made a quick rough pattern based on my interpretation of the photos above. Basically, one piece that wraps completely around the mag 360°. This is my best guess. Hope it helps. Quote
Contributing Member JLSleather Posted February 26, 2017 Contributing Member Report Posted February 26, 2017 (edited) I thought it looked like one piece, but tough to be sure without seeing the OTHER side of the pouch. As is, it looks like they stitched down the fold. Looks like Joon typing at the same time. It looks like his design is correct. Edited February 26, 2017 by JLSleather Quote
Members plinkercases Posted February 26, 2017 Members Report Posted February 26, 2017 Yup Joon got it. I was stuck on the retention strap being on the middle section (from a previous think through) and thus could not get the stamping on the same side all round. Good work thanks, Quote
Members Forester Posted February 26, 2017 Author Members Report Posted February 26, 2017 Thanks for all the input guys, its appreciated. Regards Forester Quote
Members Forester Posted April 22, 2017 Author Members Report Posted April 22, 2017 Hi All Took me a while but this is what I came up with. Made from 2 parts as I did not like the bulge when the sheath was bent around the belt. Will fit a Leatherman Wave or Rebar. Regards Forester Quote
Members OLDNSLOW Posted April 22, 2017 Members Report Posted April 22, 2017 nice job I really like that, but if you would please take one more photo of how the wrap around strap attaches. Thanks Quote
Members Forester Posted April 22, 2017 Author Members Report Posted April 22, 2017 Hi Oldnslow. The wrap around strap is sewn on, if you look at both sides of the sheath one has 2 layers of leather the other side 3. Regards Forester Quote
Members plinkercases Posted April 22, 2017 Members Report Posted April 22, 2017 Very nice thanks for the pics and experience with it. Quote
Members chiefjason Posted April 22, 2017 Members Report Posted April 22, 2017 Looks good. Nice job. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.