Windrider30 Report post Posted July 4, 2017 I have a LOT of scrap and was a bit bored today so made this little thing, its made to be wrapped around a take a way cup of coffee and laced in place. Just thought I would mess around with some of the stamps that I have and scrap to keep myself entertained a little. Quote Share this post Link to post Share on other sites
motocouture Report post Posted July 5, 2017 Nice! You'll have to post an action shot Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 5, 2017 16 hours ago, motocouture said: Nice! You'll have to post an action shot That would require another person in the room and I swear to much when stamping to let someone else in the room LOL Quote Share this post Link to post Share on other sites
YinTx Report post Posted July 5, 2017 How about an action shot with the end product in it's native environment instead? I like the grommet idea, I was planning to make a few to get the feel for some of my stamping tools, but worried about getting them to fit various sized cans/cups/mugs/etc. YinTx Quote Share this post Link to post Share on other sites
motocouture Report post Posted July 6, 2017 And if you take a photo we won't hear the swearing i like the grommets, too. Maybe if you used elastic cord as the lacing, it would fit different sizes? Was thinking about making myself one for all the starbukkers I drink.... Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 6, 2017 Elastic cording I was thinking about as well but for now thinking of leather lace, and the wife pointed out that it can double as a small wrist cuff lol, but I am thinking of getting a few of those plastic string locks, you can push the lock down, slide it up the lace and lock it in place Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 11, 2017 Ok a couple of quick "action shots" this works pretty good though going to have to get some sliding locks will make it SOO much easier and faster to put this on!! Just used a bit of roo lace scrap that I had to lace it onto the cup, just slide the cup into the holder and pulled tight and laced it go ta few nice compliments on it. But the best part...my hand was not cooked holding this as I walked home! Saddly the hot chocolate did not last all the way home, some fat bastard drank it all!! Quote Share this post Link to post Share on other sites
Wedgetail Report post Posted July 11, 2017 (edited) Nice! I like it with the thonging, good job on the tooling too. Coffee sleeves are a bit of a favorite of mine. They can be super personalised for gifts, or branding. @YinTx make them for a medium size. They will usually fit everything bigger and most smaller. Unless you're like me and only ever buy BIG coffees =p Edited July 11, 2017 by Wedgetail Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 11, 2017 1 hour ago, Wedgetail said: Nice! I like it with the thonging, good job on the tooling too. Coffee sleeves are a bit of a favorite of mine. They can be super personalised for gifts, or branding. @YinTx make them for a medium size. They will usually fit everything bigger and most smaller. Unless you're like me and only ever buy BIG coffees =p The cup was a large and i am pretty sure it will easy fit an even bigger cup. I like this as it makes the cup sit in my hand better Quote Share this post Link to post Share on other sites
Sanch Report post Posted July 11, 2017 Ok had to chime in save the empty disposable cup. Cut out the bottom, make 2 vertical cuts 1/2" apart all the way from top to bottom and viola!! Instant pattern!! Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 11, 2017 38 minutes ago, Sanch said: Ok had to chime in save the empty disposable cup. Cut out the bottom, make 2 vertical cuts 1/2" apart all the way from top to bottom and viola!! Instant pattern!! That is a damn good idea!!! Quote Share this post Link to post Share on other sites
YinTx Report post Posted July 11, 2017 13 hours ago, Windrider30 said: Ok a couple of quick "action shots" this works pretty good though going to have to get some sliding locks will make it SOO much easier and faster to put this on!! Just used a bit of roo lace scrap that I had to lace it onto the cup, just slide the cup into the holder and pulled tight and laced it go ta few nice compliments on it. But the best part...my hand was not cooked holding this as I walked home! Saddly the hot chocolate did not last all the way home, some fat bastard drank it all!! Now thats HOT.... or cool... or both! great action shot. Reminds me of a corset.. Gotta make me some now... YinTx Quote Share this post Link to post Share on other sites
motocouture Report post Posted July 12, 2017 8 hours ago, YinTx said: Now thats HOT.... or cool... or both! great action shot. Reminds me of a corset.. Gotta make me some now... YinTx Corsets or mug sleeves? Quote Share this post Link to post Share on other sites
YinTx Report post Posted July 12, 2017 48 minutes ago, motocouture said: Corsets or mug sleeves? hehe. Yeah, corsets probably out of my area of expertise for now, so mug sleeves... maybe some that look like corsets.. that'd be different. Yintx Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 12, 2017 13 minutes ago, YinTx said: hehe. Yeah, corsets probably out of my area of expertise for now, so mug sleeves... maybe some that look like corsets.. that'd be different. Yintx Corsets are not as hard as you may think you can "cheat it" a little and use a 5 to 6 oz leather that way you do not have to mess with the boning. This was the very first corset that I have ever done...hmm might have to start an album here to show off the corsets that I have done. Quote Share this post Link to post Share on other sites
Sofaspud Report post Posted July 12, 2017 9 hours ago, Windrider30 said: Corsets are not as hard as you may think you can "cheat it" a little and use a 5 to 6 oz leather that way you do not have to mess with the boning. This was the very first corset that I have ever done...hmm might have to start an album here to show off the corsets that I have done. "Corsets and boning"? Should this thread get moved to the adult section? Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted July 12, 2017 7 hours ago, Sofaspud said: "Corsets and boning"? Should this thread get moved to the adult section? nope not talking about anything perverted cloth corset and light leather needs the support of either steel or platic boning and umm adult setion? Quote Share this post Link to post Share on other sites
