Jbrandon Report post Posted September 14, 2017 A friend of mine gave me a wallet he bought from some retail store that was already falling apart after only having it for a few weeks, so I made him a new one like it. Quote Share this post Link to post Share on other sites
YinTx Report post Posted September 14, 2017 Nice. That should last a good bit longer! YinTx Quote Share this post Link to post Share on other sites
maxdaddy Report post Posted September 14, 2017 What purpose do the tabs serve? Quote Share this post Link to post Share on other sites
Jbrandon Report post Posted September 14, 2017 You insert cards in the end of the wallet and when you pull the tab it slides your card up and about 1/3 of the way out. You can see a generic card in the third picture. Quote Share this post Link to post Share on other sites
kiwican Report post Posted September 14, 2017 I'm not usually a fan of square cnr wallets. But I think you pulled it off well Quote Share this post Link to post Share on other sites
robbied Report post Posted September 15, 2017 The tab idea is quite clever indeed. Very well executed. Quote Share this post Link to post Share on other sites
ryankim3612 Report post Posted September 17, 2017 super nice work! question: What is the thickness of the pieces? Quote Share this post Link to post Share on other sites
Jbrandon Report post Posted September 17, 2017 (edited) The outside piece is 5-6 oz. and the inside piece is 3-4 oz. If I remember correctly. Edited September 17, 2017 by Jbrandon Quote Share this post Link to post Share on other sites
alpha2 Report post Posted September 17, 2017 I was actually approached about this feature recently. Pull-tab, card pops out. This could be the next big thing. I doubt it, though, as my cut-outs, and others, accomplish the same thing, with a lot less complexity, and similar results. Still, it is catchy, and does work. Quote Share this post Link to post Share on other sites
Jbrandon Report post Posted September 17, 2017 The original design had the tabs on the outside of the wallet which I changed because I felt like when you slid it in your pocket it might catch one of the tabs and push your cards out. I'm thinking about making one for myself because it makes getting cards out easy but a wallet with moving parts is just asking for something to break. Also I like for my card slots to be where nothing can fall out when it's closed. Quote Share this post Link to post Share on other sites
Burritto Report post Posted September 18, 2017 On 9/13/2017 at 6:09 PM, Jbrandon said: A friend of mine gave me a wallet he bought from some retail store that was already falling apart after only having it for a few weeks, so I made him a new one like it. love the pull tabs! fantastic idea!!! Quote Share this post Link to post Share on other sites
LeatherWorkerGirl Report post Posted September 21, 2017 Wow! That looks amazing! Quote Share this post Link to post Share on other sites
Fire88 Report post Posted September 27, 2017 Very nice I've never seen the pull tabs done before Quote Share this post Link to post Share on other sites
swellco Report post Posted October 11, 2017 Very Nice!! I have one of those wallets I bought online. Fell apart in 6 months. Got another replacement and edges started fraying in 3 months. This is the wallet I want to make. Would you mind sharing plans or how it was done? Quote Share this post Link to post Share on other sites
Jbrandon Report post Posted October 12, 2017 Well as far as plans for making one I just looked over the one my friend had. Much like yours it was coming apart. Then I just built it. I'm the world's worst at not making a keeper pattern or template for future use. I only make one about 50% of the time. Really it's just a piece of 4-5 oz. leather sewn to another piece of 2-3 oz leather with the straps sewn in place it's pretty simple to make. Quote Share this post Link to post Share on other sites
swellco Report post Posted October 19, 2017 (edited) Thanks for the reply. I actually figured it out after I posted. Lazy me. I took it apart and now have a good idea of what to do. I like the leather piece you put on the tab pull out. Where did you get the money clip? Most the ones I see would stick out the sides. Edited October 19, 2017 by swellco Quote Share this post Link to post Share on other sites
