Jump to content

Recommended Posts

  • Members
Posted

That is an interesting story.  I saw a home grown sliver not long ago that was basically a block of wood 4x4?  There was a blade clamped in a groove with a c clamp and the guide was very crude.  I think it was a ruler fastened down as a guide edge and a credit card to stabilize the leather as it was being pulled through.  He was beveling long strips that were probably 3/8" and stretchy. 

I am not sure if anyone is following me in the design.  I will try to find it again. 

BTW:  sorry for the thread hijack earlier.  

Scott

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

Posted (edited)
On ‎29‎/‎12‎/‎2017 at 8:16 PM, bikermutt07 said:

As for poking yourself.... I use a wine cork to back up the leather when stitching. That was the awl goes into the cork, not me. I'm not a fan of spilling my sissy juice.

I thought a wine cork was not big enough to stop the needle from letting in daylight (aka letting out sissy-juice), so I use a cork sanding block that is a lot bigger. Then again ... accumulating the wine corks is a lot more enjoyable than buying a sanding block.

Edited by Rockoboy
check grammar

Kindest regards

Brian

 

"Whether you think you can or whether you think you can't, you are right"  Henry Ford

Machines: Singer 201p, Kennedy,  Singer 31K20, Singer 66K16 ("boat anchor" condition), Protex TY8B Cylinder Arm (Consew 227r copy), Unbranded Walking Foot (Sailrite LSV-1 copy)

  • 2 weeks later...
  • Members
Posted

Turns out that getting my knives sharper than sharp makes skiving stretchy leather feel like cutting through air.  Now, *keeping* them that sharp through the entire process is something I'm still learning, but anyway, sharp knives really seem to be the key.

  • Members
Posted

https://www.amazon.com/Tandy-Leather-Super-Skiver-3025-00/dp/B0036KZ9KC?SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-iphone-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B0036KZ9KC

 

i have used one of these, mine has a little curve to the blade though, with a little luck on some pretty stretchy leather.  I chose this style cause I felt like it would be wiser to control.  I have not used a push style or a round knife.  On the stretchy part I got some pretty diecent results with some practice and stroping. Not near as easy or as pretty as veg tan.  It did make a pretty good rolled edge I believe.  It did take a while though. 

  • Members
Posted

While I haven't tried it on such stretchy leather as you are using, I have used adhesive drawer liner to stabilize tooling leather.  Maybe it would work for stretchy leather?

  • Members
Posted
4 hours ago, awnova said:

While I haven't tried it on such stretchy leather as you are using, I have used adhesive drawer liner to stabilize tooling leather.  Maybe it would work for stretchy leather?

That would be worth a try....

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...