DarkGoku Posted January 23, 2018 Report Posted January 23, 2018 Hay guys, Anyone have experience with the cobra class 4 sewing machine? I am having trouble keeping my stitching even top and bottom from the edge. (top perfect, bottom to close to the edge or comes out the side of the edge) I'm using a left presser foot and the regular plate with feed dog. My thread is 277 top and 207 bottom - bonded nylon. I'm going through 2 layers of 8oz. leather. my stitch line is 3/16" from the edge. I also use the platform that mounts to the table stand so I can have a flat surface for my work to rest so I don't have to juggle the work and guide:) I see people using their machines on youtube to make beautiful stitches, and i would love to know how to do it also. Any advice would help, not many vids out there that show different ways for setup. I love projects that have the stitch line closer to the edges, it makes the work cleaner looking. Thank you for your time Quote
Northmount Posted January 23, 2018 Report Posted January 23, 2018 Make sure you keep your work piece flat on the table. If you lift the outside edge, bottom stitch will move towards the edge. I've learned the hard way! I assume you are also using an edge guide to help follow the edge too. If not, it helps most of the time. Tom Quote
DarkGoku Posted January 23, 2018 Author Report Posted January 23, 2018 a lot of it is the work dips as the feed dog drops on the cycles, but i just cant get the hang of it. Quote
RockyAussie Posted February 7, 2018 Report Posted February 7, 2018 On 1/23/2018 at 7:51 PM, DarkGoku said: a lot of it is the work dips as the feed dog drops on the cycles, but i just cant get the hang of it. Expand Check out this post I did awhile back, I think it will give you the answer. I had the same problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.