Members Kenl Posted February 14, 2018 Members Report Posted February 14, 2018 Got tired of belt holes not being in a straight line. Quote
Members Matt S Posted February 14, 2018 Members Report Posted February 14, 2018 That looks handy, and I bet it wasn't an expensive fence to build ;-) If you attach a ruler to the fence, with the zero in line with the centre of the punch, you can easily space your holes too. Let's say your hole spacing is 1.5". Punch the first hole, slide the belt so the hole is level with the 1.5" mark, then punch again... Rinse and repeat! Quote
Members veedub3 Posted February 14, 2018 Members Report Posted February 14, 2018 Exactly how I have mine set up. Karina Quote "The only man who makes no mistake, is the man who does nothing." Theodore Roosevelt
alpha2 Posted February 14, 2018 Report Posted February 14, 2018 I don't have a problem with the round holes, but the ovals are a challenge. I've made a template from leather to help, but it's still slightly "ambiguous". Quote So much leather...so little time.
Members Kenl Posted February 14, 2018 Author Members Report Posted February 14, 2018 (edited) Thanks Matt sounds like a good ideal. Yes the oval holes are a little more difficult. If my eyes were a little younger I am sure it wouldn't have been an issue to begin with? LOL Edited February 14, 2018 by Kenl Quote
alpha2 Posted February 15, 2018 Report Posted February 15, 2018 I wouldn't know, it's been SOME TIME since was "a little younger". But, on the other hand...retirement ROCKS!!! I've been puttering around in the leather shop since the first of the year. I'm okay with that! Quote So much leather...so little time.
Members Kenl Posted February 15, 2018 Author Members Report Posted February 15, 2018 Retirement is great! Quote
Members Clintonville Leather Posted March 1, 2018 Members Report Posted March 1, 2018 That is a really great idea, I just have to drill out the ram on my arbor press. Quote
Members Kenl Posted March 1, 2018 Author Members Report Posted March 1, 2018 It really works good Quote
Members Clintonville Leather Posted March 1, 2018 Members Report Posted March 1, 2018 39 minutes ago, Kenl said: It really works good I had been thinking about the weaver self centering punch, this would be much more economical Quote
Members Clintonville Leather Posted March 7, 2018 Members Report Posted March 7, 2018 On 2/28/2018 at 11:00 PM, Kenl said: It really works good Ground down a flat spot on my oval punch for the set screw to sit in Holy smokes that works well! Time to get a second arbor press so I don't have to switch back and forth. Thanks for the EXCELLENT idea! Quote
Members Kenl Posted March 7, 2018 Author Members Report Posted March 7, 2018 Yes the flat spot keeps th oval punch in alignment . Good ideal on a second press. Quote
Members Basically Bob Posted March 8, 2018 Members Report Posted March 8, 2018 On February 14, 2018 at 7:39 PM, Kenl said: Retirement is great! It sure is! Quote
Members Kenl Posted March 8, 2018 Author Members Report Posted March 8, 2018 I drilled the arbor hole deeper so it would hold the punch more secure and give me more room form the end of the punch to the work surface. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.