Moderator immiketoo Posted May 2, 2018 Moderator Report Posted May 2, 2018 If you've ever tried to resist dye with tan kote or supersheen or whatever, you probably had less than stellar results. Using liquid frisket can do the job but there's a few things you need to know. Quote
Contributing Member JLSleather Posted May 2, 2018 Contributing Member Report Posted May 2, 2018 I don't much care for that holster. Looks.. idunno... unfinished somehow Quote
Moderator immiketoo Posted May 3, 2018 Author Moderator Report Posted May 3, 2018 19 hours ago, JLSleather said: I don't much care for that holster. Looks.. idunno... unfinished somehow You are an astute observer! Quote
Moderator immiketoo Posted May 5, 2018 Author Moderator Report Posted May 5, 2018 Next step. Fade applied and latex removed to reveal pristine leather underneath. Quote
Contributing Member JLSleather Posted May 5, 2018 Contributing Member Report Posted May 5, 2018 Looks like she peeled purdy good. Still in teh works, more to come? (WHY does that 'h' stick like that ?@!) Quote
Moderator immiketoo Posted May 5, 2018 Author Moderator Report Posted May 5, 2018 Despite using this technique, I am still tickled when it works as anticipated. Soooooo many failures have left me with a nervous tic. Still have edges, holes and finish to apply and then its done. Quote
Members billybopp Posted May 5, 2018 Members Report Posted May 5, 2018 Looking good! That latex stuff does work great, but it feels soooooo damned weird when you peel it off. It's like peeling skin after a sunburn. (I've seen your skin tone and you're living in the Mediterranean - I know you know what I mean!) -Bill Quote
Moderator immiketoo Posted May 5, 2018 Author Moderator Report Posted May 5, 2018 4 minutes ago, billybopp said: Looking good! That latex stuff does work great, but it feels soooooo damned weird when you peel it off. It's like peeling skin after a sunburn. (I've seen your skin tone and you're living in the Mediterranean - I know you know what I mean!) -Bill Dude..I don't leave the house between 11 and 4 without SPF 1 billion! And you're right. Its creepy. Quote
Members bullmoosepaddles Posted May 5, 2018 Members Report Posted May 5, 2018 Thank you so much for sharing. Great video no many levels. Wonderful holster. Gene Quote
Members bullmoosepaddles Posted May 5, 2018 Members Report Posted May 5, 2018 Not enough coffee in me. The previous post should read "On so many levels". I should not type before waking. Quote
Moderator immiketoo Posted May 5, 2018 Author Moderator Report Posted May 5, 2018 Lol! I understand fully! On my second coffee of the day already. Quote
Members Sheilajeanne Posted May 5, 2018 Members Report Posted May 5, 2018 LOL, I know what you mean! I'm not a red-head, but have enough Celtic genes to need sunscreen when I go outside in summer. Is Frisket for leather only, or can you buy it in other craft stores? Quote
Moderator immiketoo Posted May 5, 2018 Author Moderator Report Posted May 5, 2018 2 hours ago, Sheilajeanne said: LOL, I know what you mean! I'm not a red-head, but have enough Celtic genes to need sunscreen when I go outside in summer. Is Frisket for leather only, or can you buy it in other craft stores? LMAO! Same here! Frisket has been used in water color and other media for a long time. Hobby lobby, Dick Blicks and Michaels all carry it. Quote
Members BDAZ Posted May 5, 2018 Members Report Posted May 5, 2018 Is that ancient Greek on the holster? Bob Quote
Members YinTx Posted May 5, 2018 Members Report Posted May 5, 2018 I watched that whole video, waiting to see dye go on and to see the peel come off. Felt somehow denied the satisfaction. Otherwise, awesome video, and great info, thanks for sharing! YinTx Quote
Members BadDaditood Posted May 7, 2018 Members Report Posted May 7, 2018 very cool, thanx! Be Super careful with benzine, the vapors are deadly Quote
Members BDAZ Posted May 7, 2018 Members Report Posted May 7, 2018 No benzine in leather dyes. Only spirits including ethanol and isopropyl alcohol. As for other spirits: . Quote
Members BadDaditood Posted May 7, 2018 Members Report Posted May 7, 2018 Yikes!! That doll looks a lot like me before you poke pins in it, let me explain-- in immiketoo's video he mentions cleaning his brushes with benzene. I did a quickie wiki and it turns out there's benzene and benzine. While both are highly flammable volatiles, wiki says "...not to be confused with..." In a nutshell: Benzine is known as petroleum ether because it is so light, and is used as a solvent. Benzene is petrochemical, used as an industrial solvent. It gives gasoline it's sweet smell and is a carcinogen. It's vapors are so nasty it was replaced by toluene which has also been removed from most products like the glue people used to sniff. A respirator is recommended for both. Quote
Moderator immiketoo Posted May 7, 2018 Author Moderator Report Posted May 7, 2018 On 5/6/2018 at 2:58 AM, YinTx said: I watched that whole video, waiting to see dye go on and to see the peel come off. Felt somehow denied the satisfaction. Otherwise, awesome video, and great info, thanks for sharing! YinTx Sorry man. Hard to film everything all the time. On 5/6/2018 at 2:36 AM, BDAZ said: Is that ancient Greek on the holster? Bob Its an ancient runic language used by the Greeks but it predates what is considered ancient Greek. 17 hours ago, BadDaditood said: very cool, thanx! Be Super careful with benzine, the vapors are deadly I have all kinds of respirators and good ventilation. 15 hours ago, bikermutt07 said: I embrace my spirit dyes. Like spirit animals? 14 hours ago, BDAZ said: No benzine in leather dyes. Only spirits including ethanol and isopropyl alcohol. As for other spirits: . I used a glue solvent to clean it. Don't think its actually benzine or benzene but some other solvent. I should probably check that... 1 hour ago, BadDaditood said: Yikes!! That doll looks a lot like me before you poke pins in it, let me explain-- in immiketoo's video he mentions cleaning his brushes with benzene. I did a quickie wiki and it turns out there's benzene and benzine. While both are highly flammable volatiles, wiki says "...not to be confused with..." In a nutshell: Benzine is known as petroleum ether because it is so light, and is used as a solvent. Benzene is petrochemical, used as an industrial solvent. It gives gasoline it's sweet smell and is a carcinogen. It's vapors are so nasty it was replaced by toluene which has also been removed from most products like the glue people used to sniff. A respirator is recommended for both. I also wear gloves with that stuff. Its really hard on the body. Quote
Members Sanch Posted May 12, 2018 Members Report Posted May 12, 2018 On 5/5/2018 at 10:37 AM, Sheilajeanne said: LOL, I know what you mean! I'm not a red-head, but have enough Celtic genes to need sunscreen when I go outside in summer. Is Frisket for leather only, or can you buy it in other craft stores? Search for liquid latex and you'll find it cheaper in larger quantities i purchased a quart abour 5 years ago for approximately $12 and its still good. Kept in cool dark cabinet. Quote
Members Geo148 Posted June 29, 2019 Members Report Posted June 29, 2019 (edited) Can you use the liquid Latex over a previously colored as in painted and/or dyed area? Such as a tooled multi-colored picture Then have the a larger area stained similar to your video. This is a Back belt /Kidney belt I will be using for Renaissance Festivals. Sorry for the crappy Cell phone pic. Still have some coloring to do for the shield & helmet. The back ground "quilted area" I will cover with Saddle tan. I don't want to "muddy" the family crest. Edited June 29, 2019 by Geo148 add pictures Quote
Moderator immiketoo Posted June 30, 2019 Author Moderator Report Posted June 30, 2019 On 6/29/2019 at 2:18 PM, Geo148 said: Can you use the liquid Latex over a previously colored as in painted and/or dyed area? Such as a tooled multi-colored picture Then have the a larger area stained similar to your video. This is a Back belt /Kidney belt I will be using for Renaissance Festivals. Sorry for the crappy Cell phone pic. Still have some coloring to do for the shield & helmet. The back ground "quilted area" I will cover with Saddle tan. I don't want to "muddy" the family crest. Absolutely. Just make sure you test on a piece similar to your work piece and of course, make sure everything is fully dry. Quote
Contributing Member JLSleather Posted June 30, 2019 Contributing Member Report Posted June 30, 2019 On 6/29/2019 at 6:18 AM, Geo148 said: Can you use the liquid Latex over a previously colored as in painted and/or dyed area? Such as a tooled multi-colored picture Then have the a larger area stained similar to your video. If you're covering large areas, just apply the 'stick-em' to the back of a piece of card stock then stick the card stock to the design. Don't even need to "glue" the whole piece.. just maybe 1/2" along all edges. Some of you may have heard of "masking"? Leather people like to call it "resist" or "block", but it's the same thing. And, no need to find an art supply store and spend the morning's wages on something to "mask" with. Most places have a small bottle of RUBBER CEMENT which works great for this. An 8 oz bottle is a couple bucks at any hobby lobby or home improvement store, and lasts a LONG time. Note I have tried a couple different versions of "painter tape" as well - from the blue stuff in paint stores to "pro" stuff sold in art stores. SOme are better than others, but a few can leave a residue that can be very difficult to remove, so I don't recommend those unless you're familiar with them. The insignia in the center of this notebook is about 5" x 7" (just the yellow gold part). I assure you I did NOT "paint" that with latex Because it's largely "straight", the rope was "masked" (or "frisketed" or "blocked" or "resist"ed) with TAPE (red art supply tape). And the lettering, which needed to be hand cut for the scroll, was done with... well... that's another time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.