jrny4wrd Report post Posted July 6, 2018 I recieved a thread size (bonded nylon) 69 and I also have a 207, the thread sizes look the same as I match them up. Are the differences too small to tell by eye, or is there something else going on? Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted July 7, 2018 Very big difference.... see chart below. 14 hours ago, jrny4wrd said: something else going on Quote Share this post Link to post Share on other sites
chrisash Report post Posted July 7, 2018 (edited) From memory 69 is just under 0.3 mm and 207 about 0.4mm or just under but the breaking strain is much wider at 11 pound ver 35 pound Edited July 7, 2018 by chrisash Quote Share this post Link to post Share on other sites
jrny4wrd Report post Posted July 12, 2018 On 7/7/2018 at 1:05 AM, chrisash said: From memory 69 is just under 0.3 mm and 207 about 0.4mm or just under but the breaking strain is much wider at 11 pound ver 35 pound It says #69 inside the spool. So that might be the pound rather than thread number? Just seems like a thick 69 Quote Share this post Link to post Share on other sites
