Members DrmCa Posted September 14, 2018 Members Report Posted September 14, 2018 The industry has not been devastated - it is thriving. Workforce - a different story. Quote Machines: Mitsubishi DB-130 single needle, Kansai Special RX-9803/UTC coverstitch, Union Special 56300F chainstitch, Pfaff 335-17 cylinder arm walking foot, Bonis Type A fur machine, Huji 43-6 patcher, Singer 99 hand cranked, Juki DDL-553 single needle (for sale)
Members Happy Hooligan Posted September 19, 2018 Members Report Posted September 19, 2018 On 9/14/2018 at 5:37 AM, gottaknow said: I went yesterday to the factory where I spent almost 8 years of my career. I bought 3 pieces of equipment that will be a reminder of my time there. It was weird seeing the building so empty. I ended up with the Utica Mills combo slitter. I had rebuilt this machine 3 years ago, so I knew it was in good shape, and we needed another one. I bought a small heat press while I’ll rebuild, and a 5hp vacuum motor. It had been factory rebuilt a number of years ago. Factories use vacuum systems for various things. I obviously had a huge advantage in this auction since I knew all of the machines. Some people didn’t have a clue what they bought or what the machine actually did. I took a final look around and then walked away, making the long drive back to Seattle. I’ve had a long career and am currently working for the 6th apparel manufacturer during a 38 year span. Not bad I guess for an industry that has been devastated by importing. Regards, Eric Do you remember a 231-8 and a 35800 DR? I got them and would love to know their history. The 231 was missing it's feed dogs and foot. Quote
Members R8R Posted September 19, 2018 Members Report Posted September 19, 2018 On 9/14/2018 at 5:37 AM, gottaknow said: I went yesterday to the factory where I spent almost 8 years of my career. I bought 3 pieces of equipment that will be a reminder of my time there. It was weird seeing the building so empty. I ended up with the Utica Mills combo slitter. I had rebuilt this machine 3 years ago, so I knew it was in good shape, and we needed another one. I bought a small heat press while I’ll rebuild, and a 5hp vacuum motor. It had been factory rebuilt a number of years ago. Factories use vacuum systems for various things. I obviously had a huge advantage in this auction since I knew all of the machines. Some people didn’t have a clue what they bought or what the machine actually did. I took a final look around and then walked away, making the long drive back to Seattle. I’ve had a long career and am currently working for the 6th apparel manufacturer during a 38 year span. Not bad I guess for an industry that has been devastated by importing. Regards, Eric I had a similar feeling once, although not to that degree. I worked for several different screen printing companies in the SF bay area from the late 80's into the 90's. One I worked for in the mid 90's grew HUGE and quickly. They fell even quicker when their market shifted. When was there in the mid 90's, it was the night shift in a shop with one automatic and one manual press, in a tiny building. When they shut down in 2009, they had a huge shop with 10 automatic machines, a giant distribution center, multiple offices, etc. I think the building was well over 100,000 sq feet. I bought a shop's worth of manual equipment from them and the next day 9 semi trucks and an army of techs arrived and stripped the shop of the rest of the equipment in like 12 hours and hauled it all off to Mexico. I closed my shop after several years and worked as a facility and maintenance supervisor for a couple other shops. I whipped those places into shape, but I know they've sold off gear since I left. It's weird to see equipment go after you spent many hours wrenching, cleaning and greasing it. You get that sick feeling in your gut that the next guy won't keep it clean and tuned. Ugh. Onward. Quote
Members LeslieR Posted October 3, 2018 Members Report Posted October 3, 2018 On 9/11/2018 at 12:29 PM, Firestar1485 said: Prices skyrocketed toward the end, seemed like most good machines sold above craigslist or ebay pricing. After placing some 200 bids, I ended up winning three items (2 of which I was only bidder, not much value). I did not win any machines, dropped out at $350+ on the singer 135's and $200 on the singer 211's. For me it was just too much to risk, not being able to test run the machines. If anyone bought thread locally and wants to split/sell off excess, just let me know. I bought 4 sewing machines for my mom and my aunt, 2 of the Union special sergers and 2 Singer 281-22. I also bought one of the thread lots and a lot of needles of which I am interested in selling the excess of. But my main question is where to find parts for the Singers. After we got them home we realized my aunts machine was missing a knob on top that when I looked at the parts diagram is a pressure regulating thumb screw and pressure bar guide, part number 147091. I’m not sure if the pressure bar and the spring are there or not. I’ll have to take a closer look the next time I go to her house. I’ve been looking online without success for the one part. Does anyone have a suggestion where to get it? Quote
Members Firestar1485 Posted October 3, 2018 Members Report Posted October 3, 2018 I'm interested in thread. I was hoping to pick up heavy weight thread, so let me know what you have that you might want to sell. I am located in North Idaho. In terms of parts, I have been very lucky to find replacement parts on Ebay. There is a seller in Seattle/Portland area that I bought a lot of very unique parts from. 90% were right on and the few that were not, they quickly accepted returns on. I believe most parts I purchased were from "NGOSEW Sewing Parts Company" on Ebay. There are a number of other companies (many of which have active members here on leatherworker.net) that can probably help too! Quote
Mark842 Posted October 3, 2018 Report Posted October 3, 2018 I interested in buying whatever needles your interested in selling if you wanted to bulk out what you don't want. Quote
Members Scoutmom103 Posted October 3, 2018 Members Report Posted October 3, 2018 There are a few industrial sewing machine groups on FB, one of which is for parts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.