Sewing machine thread looper for thread stand

[RockyAussie]

I hate reaching over and trying to poke the thread through the tiny 2mm hole in my cowboy machine thread stand so here is what I came up with. Don't know what you would call it so let me know if you do.

The first pic shows the finished tool. Note that this is printed with PLA+ which is supposed to be 10 times stronger than PLA. (3D Fillies)

Next position the tool in the thread hole

Grab your thread

Poke it in the tool slot

Now pull the tool back out of the hole

For those that would like to print it I had one leg not print out the first time. Although it looks to be there in Curra it did not show up in the G code. I should have checked the layers veiw as it shows up there. I found I had to rotate it on the plate a couple of times to get a direction to where it all showed up in the layers. I double checked the G file and Bingo it worked. Here is the stl file - Thread stand loop toolS.stl

Forgot to add I have embedded Made in Australia into the base if that's a big deal.

That's it for now

Brian

[RockyAussie]

I mentioned above the pla filament being PLA+ from 3D Fillies being 10 times stronger than regular pla. Here is a link https://3dfillies.com/?gclid=CjwKCAjwzqPcBRAnEiwAzKRgSxhTk4htbykpLdkqAzxdBW0AE2JEs7o3NqimPslmJhQV0Qmm-uoqCRoCKX0QAvD_BwE 

They appear to have a broad range of other useful filaments as well like pla with steel for your average printer as well.

[plinkercases]

Brian I bet you would 3D print your supper if you could .... nice tool for sure.

[Rockoboy]

That is a little beauty! How much to post one to 6168 WA?

[RockyAussie]

3 hours ago, plinkercases said:

Brian I bet you would 3D print your supper if you could .... nice tool for sure.

I don't know about that I got a pretty good missus but I have heard they are printing food stuff these days and houses as wel, Interesting. I think you are about to be a 4 star member.....

[plinkercases]

I keep thinking of things i would print but that tool/toy will have to wait a few years i think.

What is a 4 star member mean? Number of posts?

[RockyAussie]

1 hour ago, Rockoboy said:

That is a little beauty! How much to post one to 6168 WA?

How about if I post you a few with some zip guides etc and you pass some on to others over your side? 500 gram express is about $11.00. Way more than the product value. I cover this time if you want to pm me an address.

[RockyAussie]

3 minutes ago, plinkercases said:

I keep thinking of things i would print but that tool/toy will have to wait a few years i think.

What is a 4 star member mean? Number of posts?

Yeaah look to the left now....1000 posts and 4 dots above

[plinkercases]

Well this is exciting and I don't think I will be able to sleep tonight!! Time to try anyhow. 1130 here in Ontario.

[dikman]

Just made one (using "ordinary" PLA) and it works ok. I tried one of those needle-threading thingies that Constabulary mentioned in the other thread but it didn't work 'cos it's too short. I've got some PLA+ coming and I'll make another when it gets here. I'm going to try and modify it, Brian , as I reckon a hole in the end for some string to make a hanging loop or a loop molded into the end might be a good idea, then I can hang it on the thread stand (and not lose it!).