Albob Posted September 15, 2018 Report Posted September 15, 2018 I think the roses are amazing, please do not forget to share progress photos. Quote When the poop hits the fan, we's all eleven bravos
ABHandmade Posted September 15, 2018 Author Report Posted September 15, 2018 Continuation. It is dyed with alcohol based dye. I'm use Toledo Super. Treated with mink oil. A small painting with same dye type was applied. In a few days, the embossing will become a little lighter - the oil will be completely absorbed. To be continued... Quote
Members battlemunky Posted September 15, 2018 Members Report Posted September 15, 2018 Man, that is really well done and yes, lifelike. I love this! Quote
Members bullmoosepaddles Posted September 15, 2018 Members Report Posted September 15, 2018 Thank you for the continued photos. Man that is beautiful. Quote
ABHandmade Posted September 15, 2018 Author Report Posted September 15, 2018 35 minutes ago, battlemunky said: Man, that is really well done and yes, lifelike. I love this! @battlemunky, thank you for such a high appraisal of my work. 3 minutes ago, bullmoosepaddles said: Thank you for the continued photos. Man that is beautiful. Thank you, @bullmoosepaddles. Glad you liked it. Quote
Members bullmoosepaddles Posted September 15, 2018 Members Report Posted September 15, 2018 (edited) I read all your descriptions. Would it be too much trouble to ask for a photo of the embossing from the backside? Do you back fill the embossed sections once your finished with the tooling? I love embossing. I had started taking a few classes from the manager of my local Tandy store several years ago. He got transferred before I could get very far into the class. The depth amazes me. I always smile when I see your post. Thank you Edited September 15, 2018 by bullmoosepaddles added content Quote
ABHandmade Posted September 15, 2018 Author Report Posted September 15, 2018 (edited) 41 minutes ago, bullmoosepaddles said: I read all your descriptions. Would it be too much trouble to ask for a photo of the embossing from the backside? Do you back fill the embossed sections once your finished with the tooling? I love embossing. I had started taking a few classes from the manager of my local Tandy store several years ago. He got transferred before I could get very far into the class. The depth amazes me. I always smile when I see your post. Thank you I have not had time to paste the lining, so please: In this work, I did not use leather inserts to create a deeper relief. This was impractical for this image. In addition, too high a bas-relief for a wallet - rather a minus, because. increases the thickness of the product. Embossing with inserts I use in some products such as bags, where increasing the thickness does not impair the consumer properties of the thing but look well. I hope not to disappoint you with my subsequent works PS. The embossing process with leather inserts I tried to illustrate here http://leatherworker.net/forum/topic/81763-wip-another-mountain-lion-carving-and-embossing/ There, however, there is no photo of the reverse side, but on it - the rear flat part of the leather insert. Edited September 15, 2018 by ABHandmade Quote
Members bullmoosepaddles Posted September 15, 2018 Members Report Posted September 15, 2018 @ABHandmade Thank you for the time to answer my questions. The cougar I had seen when you posted it. But a second look helped me understand better. What I was asking about. The Tandy manager who I started to learn from, used leather powder, made from sanding leather into dust and glue to make a filler for the slight indention's on the backside. His train of thought was that the filling would hold the embossed section from flattening after wear. His wallet still showed good depth even after having been carried for several years at that time. The offset I saw to that was it also showed a great deal of polish/wear from standing proud of the surrounding leather. His carving was a Koi fish going from top to bottom of a biker style wallet. The depth was what made me wish to learn to do the embossed method. I must admit I let my interest slip away after he left and the new manager of the store may have been a great manager, but a poor leather worker. Quote
ABHandmade Posted September 15, 2018 Author Report Posted September 15, 2018 (edited) 21 minutes ago, bullmoosepaddles said: @ABHandmade Thank you for the time to answer my questions. The cougar I had seen when you posted it. But a second look helped me understand better. What I was asking about. The Tandy manager who I started to learn from, used leather powder, made from sanding leather into dust and glue to make a filler for the slight indention's on the backside. His train of thought was that the filling would hold the embossed section from flattening after wear. His wallet still showed good depth even after having been carried for several years at that time. The offset I saw to that was it also showed a great deal of polish/wear from standing proud of the surrounding leather. His carving was a Koi fish going from top to bottom of a biker style wallet. The depth was what made me wish to learn to do the embossed method. I must admit I let my interest slip away after he left and the new manager of the store may have been a great manager, but a poor leather worker. I sometimes use something like this when I want to get a more voluminous embossment than leather thickness allows, but the use of the inserts is not advisable. I even have a few boxes, where I put thin leather scraps for the preparation of the filler But the quality of the resulting bas-relief method with an insert that described Al Stohlman in the book "The Art of Embossing Leather" is far ahead. Although this method is more labor-intensive. Edited September 15, 2018 by ABHandmade Quote
Members bullmoosepaddles Posted September 15, 2018 Members Report Posted September 15, 2018 @ABHandmade It appears I need to find and study that book. Thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.